Abstract: This application note explains how to design an intelligent lighting controller that senses and measures the ambient lightlevel with an ambient light sensor (ALS). Equipped with a real-time clock (RTC), the controller also knows when to turn lighting on oroff at specified times. The system presented in this document can be used to control all luminaires that are mains-supply operated.Controller software is also provided in hex format.
There are many manufacturers of dot matrix LCD modules. However, most of these displaysare similar. They all have on-board controllers and drivers capable of displaying alpha numericsand a wide variety of other symbols (including Japanese "Katakana" characters). The internaloperation of LCD controller devices is determined by signals sent from a central processing unit(in this case, a CoolRunner-II CPLD).
SL811開發資料_包含源程序_電路圖_芯片資料:SL811HS Embedded USB Host/Slave Controller.The SL811HS is an Embedded USB Host/Slave Controller capable of communicate with either full-speed or low-speed USB peripherals. The SL811HS can interface to devices such as microprocessors, microcontrollers, DSPs, or directly to a variety of buses such as ISA, PCMCIA, and others. The SL811HS USB Host Controller conforms to USB Specification 1.1.The SL811HS USB Host/Slave Controller incorporates USB Serial Interface functionality along with internal full-/low-speed transceivers.The SL811HS supports and operates in USB full-speed mode at 12 Mbps, or at low-speed 1.5-Mbps mode.The SL811HS data port and microprocessor interface provide an 8-bit data path I/O or DMA bidirectional, with interrupt support to allow easy interface to standard microprocessors or microcontrollers such as Motorola or Intel CPUs and many others. Internally,the SL811HS contains a 256-byte RAM data buffer which is used for control registers and data buffer.The available package types offered are a 28-pin PLCC (SL811HS) and a 48-pin TQFP package (SL811HST-AC). Both packages operate at 3.3 VDC. The I/O interface logic is 5V-tolerant.
介紹幾種cpuThe 8xC251SA/SB/SP/SQ improves on the MCS-51 architecture and peripheral features, introducing the advanced register based CPU architecture i.e., the MCS 251 microcontroller architecture. The register based CPU supports a 40-byte register file. In addition, the 8xC251SA/SB/SP/SQ microcontroller has 256-Kbyte expanded external code/data memory space and 64-Kbyte stack space. The new controller is also specially designed to execute C code efficiently. More importantly, the 8xC251SA/SB/SP/SQ maintains binary code compatibility with MCS 51 microcontrollers but at the same time allows the use of the powerful MCS 251 microcontroller instruction set, with many new 8, 16 and 32 bit instructions available. The 8xC251SA/SB/SP/SQ has 512 bytes or 1 Kbyte of on-chip data RAM options and is available in 16 Kbytes and 8 Kbytes of on-chip ROM/OTPROM or ROMless options.
The flpydisk sample is a floppy driver that resides in the directory \\Ntddk\Src\Storage\Fdc\Flpydsk. It is similar to a class driver in that it sits a level above the floppy disk controller in the driver stack, and brokers communication between the application level and the low-level driver. The floppy driver takes commands from the application and then calls routines in the controller which will in turn perform the actual interaction with the device. The sample compiles in 64-bit, but has not been tested in this environment. It is compatible with x86 and Alpha platforms.