ANALOG INPUT BANDWIDTH is a measure of the frequencyat which the reconstructed output fundamental drops3 dB below its low frequency value for a full scale input. Thetest is performed with fIN equal to 100 kHz plus integer multiplesof fCLK. The input frequency at which the output is −3dB relative to the low frequency input signal is the full powerbandwidth.APERTURE JITTER is the variation in aperture delay fromsample to sample. Aperture jitter shows up as input noise.APERTURE DELAY See Sampling Delay.BOTTOM OFFSET is the difference between the input voltagethat just causes the output code to transition to the firstcode and the negative reference voltage. Bottom Offset isdefined as EOB = VZT–VRB, where VZT is the first code transitioninput voltage and VRB is the lower reference voltage.Note that this is different from the normal Zero Scale Error.CONVERSION LATENCY See PIPELINE DELAY.CONVERSION TIME is the time required for a completemeasurement by an analog-to-digital converter. Since theConversion Time does not include acquisition time, multiplexerset up time, or other elements of a complete conversioncycle, the conversion time may be less than theThroughput Time.DC COMMON-MODE ERROR is a specification which appliesto ADCs with differential inputs. It is the change in theoutput code that occurs when the analog voltages on the twoinputs are changed by an equal amount. It is usually expressed in LSBs.
上傳時間： 2013-11-12
上傳用戶：pans0ul
PCB設計問題集錦 問：PCB圖中各種字符往往容易疊加在一起，或者相距很近，當板子布得很密時，情況更加嚴重。當我用Verify Design進行檢查時，會產生錯誤，但這種錯誤可以忽略。往往這種錯誤很多，有幾百個，將其他更重要的錯誤淹沒了，如何使Verify Design會略掉這種錯誤，或者在眾多的錯誤中快速找到重要的錯誤。 答：可以在顏色顯示中將文字去掉,不顯示后再檢查;并記錄錯誤數目。但一定要檢查是否真正屬于不需要的文字。 問： What’s mean of below warning:(6230,8330 L1) Latium Rule not checked: COMPONENT U26 component rule.答：這是有關制造方面的一個檢查，您沒有相關設定，所以可以不檢查。 問： 怎樣導出jop文件？答：應該是JOB文件吧？低版本的powerPCB與PADS使用JOB文件。現在只能輸出ASC文件，方法如下STEP：FILE/EXPORT/選擇一個asc名稱/選擇Select ALL/在Format下選擇合適的版本/在Unit下選Current比較好/點擊OK/完成然后在低版本的powerPCB與PADS產品中Import保存的ASC文件，再保存為JOB文件。 問： 怎樣導入reu文件？答：在ECO與Design 工具盒中都可以進行，分別打開ECO與Design 工具盒，點擊右邊第2個圖標就可以。 問： 為什么我在pad stacks中再設一個via:1(如附件）和默認的standardvi(如附件）在布線時V選擇1，怎么布線時按add via不能添加進去這是怎么回事，因為有時要使用兩種不同的過孔。答：PowerPCB中有多個VIA時需要在Design Rule下根據信號分別設置VIA的使用條件，如電源類只能用Standard VIA等等，這樣操作時就比較方便。詳細設置方法在PowerPCB軟件通中有介紹。 問：為什么我把On-line DRC設置為prevent..移動元時就會彈出(圖2),而你們教程中也是這樣設置怎么不會呢?答：首先這不是錯誤,出現的原因是在數據中沒有BOARD OUTLINE.您可以設置一個,但是不使用它作為CAM輸出數據. 問：我用ctrl+c復制線時怎設置原點進行復制，ctrl+v粘帖時總是以最下面一點和最左邊那一點為原點 答： 復制布線時與上面的MOVE MODE設置沒有任何關系,需要在右鍵菜單中選擇,這在PowerPCB軟件通教程中有專門介紹. 問：用(圖4)進行修改線時拉起時怎總是往左邊拉起(圖5)，不知有什么辦法可以輕易想拉起左就左，右就右。答： 具體條件不明,請檢查一下您的DESIGN GRID,是否太大了. 問： 好不容易拉起右邊但是用(圖6)修改線怎么改怎么下面都會有一條不能和在一起，而你教程里都會好好的(圖8)答：這可能還是與您的GRID 設置有關,不過沒有問題,您可以將不需要的那段線刪除.最重要的是需要找到布線的感覺,每個軟件都不相同,所以需要多練習。 問： 尊敬的老師:您好！這個圖已經畫好了，但我只對（如圖1）一種的完全間距進行檢查，怎么錯誤就那么多，不知怎么改進。請老師指點。這個圖在附件中請老師幫看一下，如果還有什么問題請指出來，本人在改進。謝！！！！！答：請注意您的DRC SETUP窗口下的設置是錯誤的,現在選中的SAME NET是對相同NET進行檢查,應該選擇NET TO ALL.而不是SAME NET有關各項參數的含義請仔細閱讀第5部教程. 問： U101元件已建好，但元件框的拐角處不知是否正確，請幫忙CHECK 答：元件框等可以通過修改編輯來完成。問： U102和U103元件沒建完全，在自動建元件參數中有幾個不明白：如：SOIC--》silk screen欄下spacing from pin與outdent from first pin對應U102和U103元件應寫什么數值，還有這兩個元件SILK怎么自動設置，以及SILK內有個圓圈怎么才能畫得與該元件參數一致。 答：Spacing from pin指從PIN到SILK的Y方向的距離,outdent from first pin是第一PIN與SILK端點間的距離.請根據元件資料自己計算。
上傳時間： 2013-10-07
上傳用戶：comer1123
LTC®3630 是一款通用的突發模式 (Burst Mode®) 同步降壓型 DC/DC 轉換器，其包括三種可通過引腳選擇的預設輸出電壓。
上傳時間： 2013-11-03
上傳用戶：yupw24
安規基礎
標簽： Compatibility Mode 電源 安規
上傳時間： 2013-10-10
上傳用戶：bs2005
交流瓦特/瓦特小時，乏爾/乏爾小時轉換器 特點： 精確度0.25%滿刻度 多種輸入,輸出選擇 輸入與輸出絕緣耐壓2仟伏特/1分鐘 沖擊電壓測試5仟伏特(1.2x50us) 突波電壓測試2.5仟伏特(0.25ms/1MHz) (IEC255-4) 尺寸小，穩定性高 主要規格： 精確度: 0.25% F.S. (23 ±5℃) 輸入負載: <0.2VA (Voltage) <0.2VA (Current) 最大過載能力: Current related input:3 x rated continuous 10 x rated 30 sec. ,25 x rated 3sec. 50 x rated 1sec. Voltage related input:maximum 2 x rated continuous 輸出反應速度: < 250ms(0~90%) 輸出負載能力: < 10mA for voltage mode < 10V for current mode 輸出之漣波 : < 0.1% F.S. 脈波輸出型態: Photocouple of open collector (max.30V/40mA) 歸零調整范圍: 0~±5% F.S. 最大值調整范圍: 0~±10% F.S. 溫度系數: 100ppm/℃ (0~50℃) 隔離特性: Input/Output/Power/Case 絕緣阻抗: >100Mohm with 500V DC 絕緣耐壓能力: 2KVac/1 min. (input/output/power/case) 突波測試: ANSI C37.90a/1974,DIN-IEC 255-4 impulse voltage 5KV(1.2x50us) 使用環境條件: -20~60℃(20 to 90% RH non-condensed) 存放環境條件: -30~70℃(20 to 90% RH non-condensed) CE認證: EN 55022:1998/A1:2000 Class A EN 61000-3-2:2000 EN 61000-3-3:1995/A1:2001 EN 55024:1998/A1:2001
上傳時間： 2013-11-11
上傳用戶：wettetw
DC/DC 升壓IC：The FP6291 is a current mode boost DC-DC converter. Its PWM circuitry with built-in 0.25 Ω power MOSFET make this regulator highly power efficient. The internal compensation network also minimizes as much as 6 external component counts. The non-inverting input of error amplifier connects to a 0.6V precision reference voltage and internal soft-start function can reduce the inrush current. The FP6291 is available in the SOT23-6L package and provides space-saving PCB for the application fields.
上傳時間： 2013-11-07
上傳用戶：3294322651
Easy-to-use and compact point-of-load power suppliesare necessary in systems with widely distributed, highcurrent, low voltage loads. The LTC®3415 provides acompact, simple and versatile solution. It includes a pairof integrated complementary power MOSFETs (32mΩtop and 25mΩ bottom) and requires no external senseresistor. A complete design requires an inductor andinput/output capacitors, and that’s it. The result is a fast,constant frequency, 7A current mode DC/DC switchingregulator.
上傳時間： 2013-10-18
上傳用戶：avensy
Battery powered applications that have a signifi cantamount of time in standby mode, require electrical circuitsto operate with a low quiescent current to preserve batterylife. The LTC3835 synchronous step-down controlleris an excellent solution with its ultralow quiescent current(80μA). Other features make it uniquely qualifi ed tosatisfy the needs of automotive applications. A wide 4Vto 36V input voltage range protects the supply againsthigh input voltage transients and is compatible with lowvoltage cold crank conditions. The constant frequencycurrent-mode architecture with high-side inductor current
上傳時間： 2013-11-20
上傳用戶：stewart·
Automotive batteries, industrial power supplies, distributedsupplies and wall transformers are all sources ofwide-ranging high voltage inputs. The easiest way to stepdown these sources is with a high voltage monolithicstep-down regulator that can directly accept a wide inputrange and produce a well-regulated output. The LT®3493accepts inputs from 3.6V to 36V and LT3481 acceptsinputs from 3.6V to 34V. Both provide excellent lineand load regulation and dynamic response. The LT3481offers a high effi ciency solution over a wide load range andkeeps the output ripple low during Burst Mode® operationwhile the LT3493 provides a tiny solution with minimalexternal components. The LT3493 operates at 750kHzand the LT3481 has adjustable frequency from 300kHzto 2.8MHz. High frequency operation enables the use ofsmall, low cost inductors and ceramic capacitors.
上傳時間： 2014-12-24
上傳用戶：Pzj
The LTC®3562 quad output step-down regulator is designedfor multicore handheld microprocessor applications thatoperate from a single Li-Ion battery. Its four monolithic, higheffi ciency buck regulators support Intel’s mobile CPU P-Stateand C-State energy saving operating modes. The outputvoltages are independently controllable via I2C, and eachoutput can be independently started and shut down. Designerscan choose from power saving pulse-skipping mode orBurst Mode® operation, or select low noise LDO mode. Thespace-saving LTC3562 is available in a 3mm × 3mm QFNpackage and requires few external components.
上傳時間： 2013-10-07
上傳用戶：1583060504
