亚洲欧美第一页_禁久久精品乱码_粉嫩av一区二区三区免费野_久草精品视频

蟲蟲首頁| 資源下載| 資源專輯| 精品軟件
登錄| 注冊

battery

  • 基于微網的光伏變流器系統設計

    光伏發電是未來新能源發電重要方向之一,而光伏變流器是光伏發電系統的核心。介紹一種基于微網理念的光伏變流器設計。以該變流器為核心的光伏發電系統可以看做一個小型的微網系統。該系統能根據外部電網情況,工作于并網模式和離網模式。介紹了該系統的各個組成部件的設計以及變流器主電路部分器件的選型。最后,由實驗樣機進行測試。試驗結果驗證了電路拓撲結構及控制方案的可行性,也說明了系統參數設計方法的正確性。 Abstract:  Solar Photovoltaic generation is an important direction of new energy power generation in the future,while photovoltaic converter is the core of photovoltaic generation system. This paper deals with a study on photovoltaic inverter based on the concept of microgrid. This paper describes a system whose core component is the photovoltaic inverter,can work on grid-connected mode or run independently according to the external situation. The paper simply describes the main components of the system. At last,the prototype was produced and tested. Test result has proved feasibility of circuit topology structure and controlling scheme and shown correctness of system parameters.Key words: PV inverter; microgrid; off-grid; storage battery

    標簽: 光伏 變流器 系統設計

    上傳時間: 2014-12-24

    上傳用戶:Shaikh

  • Wide-input dc/dc modules offer

    When a system designer specifies a nonisolated dc/dc powermodule, considering the needed input voltage range isequally as important as considering the required performanceattributes and features. Generally, nonisolated moduleshave either a narrow or a wide input voltage range. Narrowinputmodules typically have a nominal input voltage of3.3, 5, or 12 V. For systems that operate from a tightlyregulated input bus—such as those that do not use batterybackup—a narrow-input module is often adequate sincethe input remains fairly stable.Offering greater flexibility, wide-input modules operatewithin a range of 7 to 36 V, which includes the popular12- or 24-V industrial bus. This enables a single module tobe used for generating multiple voltages. These modulesare ideal for industrial controls, HVAC systems, vehicles,medical instrumentation, and other applications that usea loosely regulated distribution bus. In addition, systemspowered by a rectifier/battery charger with lead-acidbattery backup almost always require wide-input modules.System designers who choose power supplies may wantto take a close look at the latest generation of wide-inputdc/dc modules.

    標簽: Wide-input modules offer dc

    上傳時間: 2014-12-24

    上傳用戶:dragonhaixm

  • 單片機控制的鉛酸蓄電池充電電源

     為了有效地提升鉛酸蓄電池的使用壽命,同時實現對充電過程的監控,設計出一種用單片機控制的36 V鉛酸蓄電池充電電源。本電路采用反激式拓撲,連續電流工作模式,電源管理IC設計在電源的副邊,由ELAN公司的EM78P258N單片機模擬,是用可編程器件模擬電源管理IC,實現智能電源低成本化的一次成功嘗試,通過對單片機的軟件設計實現了充電電源的狀態顯示、充電時間控制、報警、過溫保護、過壓保護、過流保護等功能。本充電器真正的實現了鉛酸蓄電池的三段式充電過程,其最高輸出功率可達90 W,效率約85%,成本不到20元,具有很高的市場競爭力。 Abstract:  In order to extend the life of lead-acid battery efficiently and supervise the charging process meanwhile, a 36V lead-acid battery charge powe supply controlled by microcontroller is designed. The charger is flyback switching power supply and works in CCM mode. A EM78P258N microcontroller made by ELAN microelectronics corporation is used as power management IC which is designed at the secondary circuit. The project is a successful attempt to low-cost intelligent power used microcontroller simulating power management IC. The charger also has the functions of the status reveal, charge time control, alarming, thermal protect, current limit and overvoltage protect by the software design. The circuit actually implements the three-step charge process, whose power is up to 90W and whose efficiency can get 85%. The net cost of this charger is less than 20 RMB, so that the charger is of powerful market competitiveness.    

    標簽: 單片機控制 充電電源 鉛酸蓄電池

    上傳時間: 2013-11-16

    上傳用戶:cepsypeng

  • NXP P89LPC901單片機汽車起動保護控制器設計

    在汽車發動機起動時,若發動機起動后起動機不能及時斷電,將會燒毀起動機或損壞飛輪齒環;若變速器不在空檔位置起動,則起動機的瞬間動力將使汽車位移,還可能引起交通事故和人身安全。為此介紹一種利用NXP P89LPC901單片機控制的汽車起動保護控制器,通過檢測汽車起動開關、變速箱檔位、發動機轉速,實現對汽車發動機起動過程檢測和保護。起動保護控制器在發動機起動過程中通過采用逐個關閉打開負載系統,解決汽車發動機過程中因起動電流大而對汽車電源的沖擊影響,延長了電瓶壽命。 Abstract:  When the automotive engine is started, the engine start motor and flywheel gear may be damaged, even traffic accidents and personal safeties may be caused by wrong operation or other factors.In order to ensure the automotive engine can be started normally and safely,it is necessary that the protecting measures and methods are considered in the automotive electrical control system.This paper introduces a kind of the automotive engine starting protect controller based on NXP P89LPC901 MCU.The controller can protect the engine starting process by detecting the starter key switch,transmission stall and engine speed.Through the use of close and open load system,the controller can solve the impact on automotive power because of the high-current load in the process of the automobile engine starting, and extend battery life.

    標簽: NXP LPC 901 P89

    上傳時間: 2013-10-15

    上傳用戶:mikesering

  • 基于MS5534B的微功耗氣壓數據采集

    氣壓是氣象監測中的一個重要參數,提出了一種氣壓數據采集模塊設計方案,該模塊采用數字氣壓傳感器MS5534B、MSP430單片機MSP430F2272和帶實時時鐘(RTC)64 KB鐵電存儲器。通過低功耗軟件設計方法以微安級整體平均功耗實現了氣壓數據的采集和存儲,適合電池供電的連續高精度氣壓采集應用。給出了模塊的軟硬件設計以及MS5534B的性能指標和使用經驗。 Abstract:  Air pressure is an important parameter in weather monitor.This paper futs forward a new design scheme of low power-air pressure data acquisition module.The module uses a digital output barometer sensor MS5534B,MSP430 microcontroller MSP430F2272 and integrated RTC 64KB FRAM,precision air pressure measurement and storage chip.Another point of this module is low power consumption, so it is well suited for battery powered air pressure data acquisition applications. At the same time,the software and hardware deign of module is presented,And the speciaties and use notices of MS5534B are given.

    標簽: 5534B 5534 MS 微功耗

    上傳時間: 2014-12-27

    上傳用戶:drink!

  • 基于MSP430F149的智能電池巡檢系統的設計

    介紹了電力操作電源與智能電池巡檢系統的特點,給出了一種基于超低功耗單片機MSP430 F149針對中小型變電站自動化運行的專用設備的基本設計原理及實現方法,最后給出了詳細硬件構成和軟件實現。該系統能滿足中小型變電站安全、可靠、自動運行的要求,并通過與上位機的串行通信實現變電站的遠程管理和控制。 Abstract:  The characters of the intelligent battery data logging system of the electric operation power are introduced.The basic design principle and the implemented methods of the special equipment which only designed for the middle or small transformer substation based on MSP430F149 are prescribed. Finally, the hardware block diagram and the software flow chart are also given. The function that the system finally needs to realize can basically meet with the middle or small transformer substation’s satisfy, reliably,and automatic running.And it can also realize the transformer substation long-distance management and control by serial communicating with the host computer.

    標簽: 430F F149 MSP 430

    上傳時間: 2013-11-25

    上傳用戶:黃華強

  • MC9S08QG8英文資料 pdf

    MC9S08QG8英文資料 The MC9S08QG8 is the newest member of the Freescale 8-bit family of highly integratedmicrocontrollers, based on the high-performance yet low power HCS08 core. The MC9S08QG8is an excellent solution for power-sensitive applications with extended battery life and maximum performance down to 1.8VDC.

    標簽: MC9 S08 QG8

    上傳時間: 2014-12-28

    上傳用戶:dxxx

  • PCB可測性設計布線規則之建議―從源頭改善可測率

    P C B 可測性設計布線規則之建議― ― 從源頭改善可測率PCB 設計除需考慮功能性與安全性等要求外,亦需考慮可生產與可測試。這里提供可測性設計建議供設計布線工程師參考。1. 每一個銅箔電路支點,至少需要一個可測試點。如無對應的測試點,將可導致與之相關的開短路不可檢出,并且與之相連的零件會因無測試點而不可測。2. 雙面治具會增加制作成本,且上針板的測試針定位準確度差。所以Layout 時應通過Via Hole 盡可能將測試點放置于同一面。這樣就只要做單面治具即可。3. 測試選點優先級:A.測墊(Test Pad) B.通孔(Through Hole) C.零件腳(Component Lead) D.貫穿孔(Via Hole)(未Mask)。而對于零件腳,應以AI 零件腳及其它較細較短腳為優先,較粗或較長的引腳接觸性誤判多。4. PCB 厚度至少要62mil(1.35mm),厚度少于此值之PCB 容易板彎變形,影響測點精準度,制作治具需特殊處理。5. 避免將測點置于SMT 之PAD 上,因SMT 零件會偏移,故不可靠,且易傷及零件。6. 避免使用過長零件腳(>170mil(4.3mm))或過大的孔(直徑>1.5mm)為測點。7. 對于電池(battery)最好預留Jumper,在ICT 測試時能有效隔離電池的影響。8. 定位孔要求:(a) 定位孔(Tooling Hole)直徑最好為125mil(3.175mm)及其以上。(b) 每一片PCB 須有2 個定位孔和一個防呆孔(也可說成定位孔,用以預防將PCB反放而導致機器壓破板),且孔內不能沾錫。(c) 選擇以對角線,距離最遠之2 孔為定位孔。(d) 各定位孔(含防呆孔)不應設計成中心對稱,即PCB 旋轉180 度角后仍能放入PCB,這樣,作業員易于反放而致機器壓破板)9. 測試點要求:(e) 兩測點或測點與預鉆孔之中心距不得小于50mil(1.27mm),否則有一測點無法植針。以大于100mil(2.54mm)為佳,其次是75mil(1.905mm)。(f) 測點應離其附近零件(位于同一面者)至少100mil,如為高于3mm 零件,則應至少間距120mil,方便治具制作。(g) 測點應平均分布于PCB 表面,避免局部密度過高,影響治具測試時測試針壓力平衡。(h) 測點直徑最好能不小于35mil(0.9mm),如在上針板,則最好不小于40mil(1.00mm),圓形、正方形均可。小于0.030”(30mil)之測點需額外加工,以導正目標。(i) 測點的Pad 及Via 不應有防焊漆(Solder Mask)。(j) 測點應離板邊或折邊至少100mil。(k) 錫點被實踐證實是最好的測試探針接觸點。因為錫的氧化物較輕且容易刺穿。以錫點作測試點,因接觸不良導致誤判的機會極少且可延長探針使用壽命。錫點尤其以PCB 光板制作時的噴錫點最佳。PCB 裸銅測點,高溫后已氧化,且其硬度高,所以探針接觸電阻變化而致測試誤判率很高。如果裸銅測點在SMT 時加上錫膏再經回流焊固化為錫點,雖可大幅改善,但因助焊劑或吃錫不完全的緣故,仍會出現較多的接觸誤判。

    標簽: PCB 可測性設計 布線規則

    上傳時間: 2014-01-14

    上傳用戶:cylnpy

  • 戶外使用的無線藍牙立體聲音頻系統

    Abstract: When people want portable music, they usually rely on battery-powered audio devices. With a bit of engineeringblood (or curiosity) running in your veins, it is not difficult to build a wireless Bluetooth® stereo audio system that can becontrolled with any device that has a Bluetooth connection and a music player

    標簽: 無線藍牙 立體聲 音頻系統

    上傳時間: 2013-10-09

    上傳用戶:天空說我在

  • 錯誤觀念妨礙電量計在無線手機中的應用

    Abstract: Most hand-held products lack accurate battery-charge monitors ("fuel gauges") because of the misconception that an accurate fuel gauge is difficult to achieve. This article debunks the myths and discusses how to accurately monitor charge at all temperatures, charge and discharge rates, and aging conditions. 無線通信和數據在新一代手機和PDA中的融合為再一次的生產力飛躍創造了條件。。隨之而來的將是經濟的增長和全新的工作方式,在便攜式計算機領域,PC筆記本曾經扮演了類似的開拓者角角。

    標簽: 錯誤 電量計 無線 手機

    上傳時間: 2013-10-17

    上傳用戶:erkuizhang

主站蜘蛛池模板: 文成县| 大竹县| 博乐市| 临西县| 旺苍县| 英德市| 灵寿县| 广东省| 永兴县| 永吉县| 于都县| 安新县| 庆元县| 潮州市| 马公市| 涞源县| 广河县| 南华县| 囊谦县| 共和县| 衡阳市| 丰镇市| 广昌县| 睢宁县| 嘉义县| 福建省| 南皮县| 大安市| 罗江县| 沙坪坝区| 宝兴县| 榆树市| 铁岭县| 乌拉特后旗| 绥宁县| 杂多县| 突泉县| 临泉县| 渭源县| 于都县| 兴宁市|