基于BASIC Stamp核心設計溫度測量電路，實現了傳感器數據的測量和保存。系統采用溫度傳感器DS1621，經過有線通信，多路溫度數據由串行口輸送到微型計算機接收實時顯示和保存。系統應用于環境試驗設備改造初試階段，滿足設計要求，證明溫度記錄系統的低成本和簡單實現是可行的。
上傳時間： 2013-10-24
上傳用戶：zchpr@163.com
為了提高PCB板制作的效率，改變傳統的化學腐蝕制板工藝，使用機械仿形銑制作電路板的方法，設計了以ATMEGA16單片機為核心部件的PCB板雕刻機控制系統。其中包括PCB雕刻機的基本功能、主要硬件電路設計和軟件的實現流程，并給出了相關設計電路。重點分析了雕刻機步進電機的驅動電路以及主軸電機的驅動電路，該雕刻機經實際運行，系統工作良好，可有效提高PCB板的制作效率。 Abstract: In order to improve the efficiency of production of PCB board and change the traditional chemical etching plates， using of mechanical copying milling method makes circuit boards，this paper introduces the PCB engraving machine control system used ATMEGA16 microcomputer as the core components. It includes basic function， the hardware circuit design and software realization process， and gives the corresponding circuit design.It analyses the drive circuit of engrawing machine stepper motor and spindle motor in detail. This engraving machine by practical operation， the system works well， which can effectively improve the production efficiency of PCB board.
上傳時間： 2013-10-17
上傳用戶：liangliang123
介紹基于VHDL的微型打印機控制器的設計。論述了微型打印機的基本原理，以及實現控制器的VHDL語言設計。打印機的數據來自系統中的存儲模塊，根據需要控制打印。該微型打印機控制器可取代傳統的微型打印機,且抗干擾性好,可靠性高，具有較強的移植性，稍加改動就可應用于不同場合。 Abstract: This paper introduced the design method of micro printer controller based on VHDL.The basic principles of microprinter is explained,as well as the realization of the controller by VHDL language.The printer data is from the system memory modules,can control printer.The design of microprinter controller has antigood and high reliability，it can replace the traditional printer.The controller has very good portability,and need little modify that can use in different situation.
標簽： VHDL 微型打印機 制器設計
上傳時間： 2013-11-03
上傳用戶：dudu1210004
介紹了電力操作電源與智能電池巡檢系統的特點，給出了一種基于超低功耗單片機MSP430 F149針對中小型變電站自動化運行的專用設備的基本設計原理及實現方法，最后給出了詳細硬件構成和軟件實現。該系統能滿足中小型變電站安全、可靠、自動運行的要求，并通過與上位機的串行通信實現變電站的遠程管理和控制。 Abstract: The characters of the intelligent battery data logging system of the electric operation power are introduced.The basic design principle and the implemented methods of the special equipment which only designed for the middle or small transformer substation based on MSP430F149 are prescribed. Finally, the hardware block diagram and the software flow chart are also given. The function that the system finally needs to realize can basically meet with the middle or small transformer substation’s satisfy, reliably,and automatic running.And it can also realize the transformer substation long-distance management and control by serial communicating with the host computer.
上傳時間： 2013-11-25
上傳用戶：黃華強
Luminary Micro Stellaris™ microcontrollers that are equipped with an analog-to-digital converter(ADC), use an innovative sequence-based sampling architecture designed to be extremely flexible,yet easy to use. This application note describes the sampling architecture of the ADC. Sinceprogrammers can configure Stellaris microcontrollers either through the powerful StellarisFamilyDriver Library or through direct writes to the device's control registers, this application note describesboth methods. The information presented in this document is intended to complement the ADCchapter of the device datasheet, and assumes the reader has a basic understanding of howADCsfunction.
標簽： Microcontr Stellaris Using the
上傳時間： 2013-10-14
上傳用戶：blans
本文簡單介紹了MCGS 組態軟件和SPCE061A 單片機的特點，即北京昆侖通態自動化軟件科技有限公司的工控組態軟件MCGS(Monitor and Control Generated System )和臺灣凌陽科技推出的16 位微控制器SPCE061A，重點介紹了如何一步步開發SPCE061A 單片機的驅動程序，并簡單介紹了下位機程序的設計，最后給出了測試情況。計算機技術的飛速發展為工業自動化開辟了廣闊的發展空間，人們可以快捷地開發和組建高效的控制系統。筆者設計的液體點滴監控模型,可以對液體點滴情況實現遠程監控和現場監控，終端和上位機均可人工設定所需的液體點滴速度并動態顯示。在這方面，MCGS 工控組態軟件提供了強有力的支持，它是一套Windows 環境下快速構造和生成上位機監控系統的組態軟件系統，可快速構造和生成數據采集、報警處理、流程控制、動畫顯示、報表輸出等界面,實現各種工程曲線的繪制、報表輸出、遠程通信等功能 [1]。MCGS 作為一種方便有效的通用工控軟件,它提供了國內外各種常用的工控設備的驅動程序。但在實際應用中,因為所用設備的特殊性,允許用戶根據需要來定制設備驅動程序。MCGS 用Active DLL 構件實現設備驅動程序,通過規范的OLE 接口掛接到MCGS 中,使其構成一個整體。鑒于Visual Basic 語言的通用性和簡單性,使用VB 來開發單片機驅動,MCGS 的實現方法和原理與標準的Active DLL 完全一致,但MCGS 規定了一套接口規范,只有遵守這些接口規范的Active DLL 才能用作MCGS 的設備驅動構件。利用具有語音和 DSP 功能的SPCE061A 單片機作為液體點滴監控模型的核心控制器，SPCE061A 是臺灣凌陽科技推出的16 位微控制器，提供了豐富的軟、硬件資源，開發靈活方便。除此之外SPCE061A 的最高時鐘頻率可達到49MHz,具有運算速度高的優勢，這為語音的錄制和播放提供了條件[4]。
上傳時間： 2013-12-19
上傳用戶：leesuper
提出了一個由AT89C52單片機控制步進電機的實例。可以通過鍵盤輸入相關數據, 并根據需要, 實時對步進電機工作方式進行設置, 具有實時性和交互性的特點。該系統可應用于步進電機控制的大多數場合。實踐表明, 系統性能優于傳統的步進電機控制器。關鍵詞: 單片機; 步進電動機; 直流固態繼電器; 實時控制Con trol System of Stepp ingMotor Ba sed on AT89C52 ChipM icrocomputerMENGWu2sheng, L ILiang (College of Automatization, Northwestern Polytechnical Unversity, Xipan 710072, China)ABSTRACT: A stepp ing motor control system based on AT89C52 chip microcomputer was described.The data can be inputwith keyboard, and stepp ingmotorwas controlled by these data. According to the demand, users can set the workingmodel of stepp ingmotor in real2time. This system can be widely used in stepp ing motor controlling. The p ractice showed that the performance of this system outdid the tradi tional stepp ing motor controller.KEY WORDS: Chip microcomputer; Stepp ingmotor; DCSSR; Real2time control
標簽： Control System ingMot Stepp
上傳時間： 2013-11-19
上傳用戶：leesuper
This white paper discusses how market trends, the need for increased productivity, and new legislation have accelerated the use of safety systems in industrial machinery. This TÜV-qualified FPGA design methodology is changing the paradigms of safety designs and will greatly reduce development effort, system complexity, and time to market. This allows FPGA users to design their own customized safety controllers and provides a significant competitive advantage over traditional microcontroller or ASIC-based designs. Introduction The basic motivation of deploying functional safety systems is to ensure safe operation as well as safe behavior in cases of failure. Examples of functional safety systems include train brakes, proximity sensors for hazardous areas around machines such as fast-moving robots, and distributed control systems in process automation equipment such as those used in petrochemical plants. The International Electrotechnical Commission’s standard, IEC 61508: “Functional safety of electrical/electronic/programmable electronic safety-related systems,” is understood as the standard for designing safety systems for electrical, electronic, and programmable electronic (E/E/PE) equipment. This standard was developed in the mid-1980s and has been revised several times to cover the technical advances in various industries. In addition, derivative standards have been developed for specific markets and applications that prescribe the particular requirements on functional safety systems in these industry applications. Example applications include process automation (IEC 61511), machine automation (IEC 62061), transportation (railway EN 50128), medical (IEC 62304), automotive (ISO 26262), power generation, distribution, and transportation. 圖Figure 1. Local Safety System
標簽： FPGA 安全系統
上傳時間： 2013-11-05
上傳用戶：維子哥哥
很多不同的廠家生產各種型號的計算機，它們運行完全不同的操作系統，但TCP.IP協議族允許它們互相進行通信。這一點很讓人感到吃驚，因為它的作用已遠遠超出了起初的設想。T C P / I P起源于6 0年代末美國政府資助的一個分組交換網絡研究項目，到9 0年代已發展成為計算機之間最常應用的組網形式。它是一個真正的開放系統，因為協議族的定義及其多種實現可以不用花錢或花很少的錢就可以公開地得到。它成為被稱作“全球互聯網”或“因特網(Internet)”的基礎，該廣域網（WA N）已包含超過1 0 0萬臺遍布世界各地的計算機。本章主要對T C P / I P協議族進行概述，其目的是為本書其余章節提供充分的背景知識。 TCP.IP協議 縮略語 ACK (ACKnowledgment) TCP首部中的確認標志 API (Application Programming Interface) 應用編程接口 ARP (Address Resolution Protocol) 地址解析協議 ARPANET(Defense Advanced Research Project Agency NETwork) (美國)國防部遠景研究規劃局 AS (Autonomous System) 自治系統 ASCII (American Standard Code for Information Interchange) 美國信息交換標準碼 ASN.1 (Abstract Syntax Notation One) 抽象語法記法1 BER (Basic Encoding Rule) 基本編碼規則 BGP (Border Gateway Protocol) 邊界網關協議 BIND (Berkeley Internet Name Domain) 伯克利I n t e r n e t域名 BOOTP (BOOTstrap Protocol) 引導程序協議 BPF (BSD Packet Filter) BSD 分組過濾器 CIDR (Classless InterDomain Routing) 無類型域間選路 CIX (Commercial Internet Exchange) 商業互聯網交換 CLNP (ConnectionLess Network Protocol) 無連接網絡協議 CRC (Cyclic Redundancy Check) 循環冗余檢驗 CSLIP (Compressed SLIP) 壓縮的S L I P CSMA (Carrier Sense Multiple Access) 載波偵聽多路存取 DCE (Data Circuit-terminating Equipment) 數據電路端接設備 DDN (Defense Data Network) 國防數據網 DF (Don’t Fragment) IP首部中的不分片標志 DHCP (Dynamic Host Configuration Protocol) 動態主機配置協議 DLPI (Data Link Provider Interface) 數據鏈路提供者接口 DNS (Domain Name System) 域名系統 DSAP (Destination Service Access Point) 目的服務訪問點 DSLAM (DSL Access Multiplexer) 數字用戶線接入復用器 DSSS (Direct Sequence Spread Spectrum) 直接序列擴頻 DTS (Distributed Time Service) 分布式時間服務 DVMRP (Distance Vector Multicast Routing Protocol) 距離向量多播選路協議 EBONE (European IP BackbONE) 歐洲I P主干網 EOL (End of Option List) 選項清單結束 EGP (External Gateway Protocol) 外部網關協議 EIA (Electronic Industries Association) 美國電子工業協會 FCS (Frame Check Sequence) 幀檢驗序列 FDDI (Fiber Distributed Data Interface) 光纖分布式數據接口 FIFO (First In, First Out) 先進先出 FIN (FINish) TCP首部中的結束標志 FQDN (Full Qualified Domain Name) 完全合格的域名 FTP (File Transfer Protocol) 文件傳送協議 HDLC (High-level Data Link Control) 高級數據鏈路控制 HELLO 選路協議 IAB (Internet Architecture Board) Internet體系結構委員會 IANA (Internet Assigned Numbers Authority) Internet號分配機構 ICMP (Internet Control Message Protocol) Internet控制報文協議 IDRP (InterDomain Routing Protocol) 域間選路協議 IEEE (Institute of Electrical and Electronics Engineering) （美國）電氣與電子工程師協會 IEN (Internet Experiment Notes) 互聯網試驗注釋 IESG (Internet Engineering Steering Group) Internet工程指導小組 IETF (Internet Engineering Task Force) Internet工程專門小組 IGMP (Internet Group Management Protocol) Internet組管理協議 IGP (Interior Gateway Protocol) 內部網關協議 IMAP (Internet Message Access Protocol) Internet報文存取協議 IP (Internet Protocol) 網際協議 I RTF (Internet Research Task Force) Internet研究專門小組 IS-IS (Intermediate System to Intermediate System Protocol) 中間系統到中間系統協議 ISN (Initial Sequence Number) 初始序號 ISO (International Organization for Standardization) 國際標準化組織 ISOC (Internet SOCiety) Internet協會 LAN (Local Area Network) 局域網 LBX (Low Bandwidth X) 低帶寬X LCP (Link Control Protocol) 鏈路控制協議 LFN (Long Fat Net) 長肥網絡 LIFO (Last In, First Out) 后進先出 LLC (Logical Link Control) 邏輯鏈路控制 LSRR (Loose Source and Record Route) 寬松的源站及記錄路由 MBONE (Multicast Backbone On the InterNEt) Internet上的多播主干網 MIB (Management Information Base) 管理信息庫 MILNET (MILitary NETwork) 軍用網 MIME (Multipurpose Internet Mail Extensions) 通用I n t e r n e t郵件擴充 MSL (Maximum Segment Lifetime) 報文段最大生存時間 MSS (Maximum Segment Size) 最大報文段長度 M TA (Message Transfer Agent) 報文傳送代理 MTU (Maximum Transmission Unit) 最大傳輸單元 NCP (Network Control Protocol) 網絡控制協議 NFS (Network File System) 網絡文件系統 NIC (Network Information Center) 網絡信息中心 NIT (Network Interface Tap) 網絡接口栓（S u n公司的一個程序） NNTP (Network News Transfer Protocol) 網絡新聞傳送協議 NOAO (National Optical Astronomy Observatories) 國家光學天文臺 NOP (No Operation) 無操作 NSFNET (National Science Foundation NETwork) 國家科學基金網絡 NSI (NASA Science Internet) （美國）國家宇航局I n t e r n e t NTP (Network Time Protocol) 網絡時間協議 NVT (Network Virtual Terminal) 網絡虛擬終端 OSF (Open Software Foudation) 開放軟件基金 OSI (Open Systems Interconnection) 開放系統互連 OSPF (Open Shortest Path First) 開放最短通路優先 PAWS (Protection Against Wrapped Sequence number) 防止回繞的序號 PDU (Protocol Data Unit) 協議數據單元 POSIX (Portable Operating System Interface) 可移植操作系統接口 PPP (Point-to-Point Protocol) 點對點協議 PSH (PuSH) TCP首部中的急迫標志 RARP (Reverse Address Resolution Protocol) 逆地址解析協議 RFC (Request For Comments) Internet的文檔，其中的少部分成為標準文檔 RIP (Routing Information Protocol) 路由信息協議 RPC (Remote Procedure Call) 遠程過程調用 RR (Resource Record) 資源記錄 RST (ReSeT) TCP首部中的復位標志 RTO (Retransmission Time Out) 重傳超時 RTT (Round-Trip Time) 往返時間 SACK (Selective ACKnowledgment) 有選擇的確認 SLIP (Serial Line Internet Protocol) 串行線路I n t e r n e t協議 SMI (Structure of Management Information) 管理信息結構 SMTP (Simple Mail Transfer Protocol) 簡單郵件傳送協議 SNMP (Simple Network Management Protocol) 簡單網絡管理協議 SSAP (Source Service Access Point) 源服務訪問點 SSRR (Strict Source and Record Route) 嚴格的源站及記錄路由 SWS (Silly Window Syndrome) 糊涂窗口綜合癥 SYN (SYNchronous) TCP首部中的同步序號標志 TCP (Transmission Control Protocol) 傳輸控制協議 TFTP (Trivial File Transfer Protocol) 簡單文件傳送協議 TLI (Transport Layer Interface) 運輸層接口 TTL (Ti m e - To-Live) 生存時間或壽命 TUBA (TCP and UDP with Bigger Addresses) 具有更長地址的T C P和U D P Telnet 遠程終端協議 UA (User Agent) 用戶代理 UDP (User Datagram Protocol) 用戶數據報協議 URG (URGent) TCP首部中的緊急指針標志 UTC (Coordinated Universal Time) 協調的統一時間 UUCP (Unix-to-Unix CoPy) Unix到U n i x的復制 WAN (Wide Area Network) 廣域網 WWW (World Wide Web) 萬維網 XDR (eXternal Data Representation) 外部數據表示 XID (transaction ID) 事務標識符 XTI (X/Open Transport Layer Interface) X/ O p e n運輸層接口
上傳時間： 2013-11-13
上傳用戶：tdyoung
ARM BASIC語言編譯器，包含整套的開發環境，豐富的庫與例程......
標簽： Basic ARM 開發環境 語言
上傳時間： 2014-12-31
上傳用戶：sc965382896
蟲蟲下載站版權所有 京ICP備2021023401號-1
