Most designers wish to utilize as much of a device as possible in order to enhance the overallproduct performance, or extend a feature set. As a design grows, inevitably it will exceed thearchitectural limitations of the device. Exactly why a design does not fit can sometimes bedifficult to determine. Programmable logic devices can be configured in almost an infinitenumber of ways. The same design may fit when you use certain implementation Switches, andfail to fit when using other Switches. This application note attempts to clarify the CPLD softwareimplementation (CPLDFit) options, as well as discuss implementation tips in CoolRunnerTM-IIdesigns in order to maximize CPLD utilization.
上傳時間： 2014-01-11
上傳用戶：a471778
微電腦型RS-485顯示電表（24*48mm/48*96mm） 特點： 5位數RS-485顯示電表 顯示范圍-19999-99999位數 通訊協議Modbus RTU模式 寬范圍交直流兩用電源設計 尺寸小,穩定性高 主要規格： 顯示范圍:-19999~99999 digit RS-485傳輸速度: 19200/9600/4800/2400 selective RS-485通訊位址: "01"-"FF" RS-485通訊協議: Modbus RTU mode 顯示幕: Red high efficiency LEDs high 10.16 mm (0.4") (MMX-RS-11X) Red high efficiency LEDs high 20.32 mm (0.8") (MMX-RS-12X) Red high efficiency LEDs high 10.16 mm (0.4")x2 (MMX-RS-22X) 參數設定方式: Touch Switches 記憶方式: Non-volatile E²PROM memory 絕緣耐壓能力: 2KVac/1 min. (input/power) 使用環境條件: 0-50℃(20 to 90% RH non-condensed) 存放環境條件: 0-70℃(20 to 90% RH non-condensed) CE認證: EN 55022:1998/A1:2000 Class A EN 61000-3-2:2000 EN 61000-3-3:1995/A1:2001 EN 55024:1998/A1:2001
上傳時間： 2015-01-03
上傳用戶：feitian920
微電腦型單相交流集合式電表（單相二線系統） 特點： 精確度0.25%滿刻度±1位數 可同時量測與顯示交流電壓,電流,頻率,瓦特,(功率因數/視在功率) 交流電壓,電流,瓦特皆為真正有效值(TRMS) 交流電流,瓦特之小數點可任意設定 瓦特單位W或KW可任意設定 CT比可任意設定(1至999) 輸入與輸出絕緣耐壓 2仟伏特/1分鐘( 突波測試強度4仟伏特(1.2x50us) 數位RS-485界面 (Optional) 主要規格： 精確度: 0.1% F.S.±1 digit (Frequency) 0.25% F.S.±1 digit(ACA,ACV,Watt,VA) 0.25% F.S. ±0.25o(Power Factor) (-.300~+.300) 輸入負載: <0.2VA (Voltage) <0.2VA (Current) 最大過載能力: Current related input: 3 x rated continuous 10 x rated 30 sec. 25 x rated 3sec. 50 x rated 1sec. Voltage related input: maximum 2 x rated continuous 過載顯示: "doFL" 顯示值范圍: 0~600.0V(Voltage) 0~999.9Hz(Frequency)(<20% for voltage input) 0~19999 digit adjustable(Current,Watt,VA) 取樣時間: 2 cycles/sec. RS-485通訊位址: "01"-"FF" RS-485傳輸速度: 19200/9600/4800/2400 selective RS-485通信協議: Modbus RTU mode 溫度系數: 100ppm/℃ (0-50℃) 顯示幕: Red high efficiency LEDs high 10.16 mm(0.4") 參數設定方式: Touch Switches 記憶型式: Non-volatile E²PROM memory 絕緣抗阻: >100Mohm with 500V DC 絕緣耐壓能力: 2KVac/1 min. (input/output/power) 1600 Vdc (input/output) 突波測試: ANSI c37.90a/1974,DIN-IEC 255-4 impulse voltage 4KV(1.2x50us) 使用環境條件: 0-50℃(20 to 90% RH non-condensed) 存放環境條件: 0-70℃(20 to 90% RH non-condensed) CE認證: EN 55022:1998/A1:2000 Class A EN 61000-3-2:2000 EN 61000-3-3:1995/A1:2001 EN 55024:1998/A1:2001
上傳時間： 2015-01-03
上傳用戶：幾何公差
集合式直流電能表（小功率的） 特點： 精確度0.05%滿刻度±1位數 可同時量測與顯示/直流電壓/電流/瓦特（千瓦）/瓦特小時（千瓦小時） 電壓輸入（DC0-99.99V/0-600.0V）自動變檔功能 顯示范圍0-9999(電流/瓦特/千瓦),0至99999999(八位數瓦特小時)可任意規劃 數位RS-485 界面 (Optional) 主要規格： 輔助電源消耗功率：＜0.35VA(DC12V/DC24V) ＜0.5VA（DC48V） ＜1.5VA（AC90-240V(50/60Hz)） 精確度: 0.05% F.S. ±1 digit (23 ±5℃) 輸入范圍：Auto range(DC0-99.99V/0-600.0V(DC voltage)) 輸入抗阻：＞5MΩ（DC voltage） 取樣時間：10 cycles/second(total) 過載顯示: " doFL " 顯示值范圍: 0-9999 digit（DCA/W(KW)） 0-9999999.999 digit(WH/(KWH)) RS-485傳輸速度: 19200/9600/4800/2400 selective RS-485通訊位址: "01"-"FF"（0-255） RS-485通信協議: Modbus RTU mode 溫度系數: 50ppm/℃ (0-50℃) 顯示幕:Bight Red LEDs high 10.16 mm(0.4") 參數設定方式: Touch Switches 記憶方式: Non-volatile E²PROM memory 絕緣耐壓能力:2KVac/1min.(input/output)（RS-485(Isolating)） 1600 Vdc (input/output) （RS-485(Isolating)） 使用環境條件: 0-50℃(20 to 90% RH non-condensed) 存放環境條件: 0-70℃(20 to 90% RH non-condensed) CE認證: EN 55022:1998/A1:2000 Class A EN 61000-3-2:2000 EN 61000-3-3:1995/A1:2001 EN 55024:1998/A1:2001
上傳時間： 2013-11-20
上傳用戶：s363994250
Spartan 3 Digilent Demo:This demo drives the perphrials on the Spartan 3 board. This drives a simple pattern to the VGA port, connects the Switches to the LEDs, buttons to each anode of the seven segment decoder. The seven segment decoder has a simple counter running on it, and when SW0 is in the up position the seven segment decoder will display scan codes from the PS2 port. This demo how ever does not drive the RS-232 port or the memory. This is a simple design done entirely VHDL not microblaze.
標簽： Spartan drives This perphrials
上傳時間： 2014-05-29
上傳用戶：SimonQQ
To increase simulation speed, ModelSim® can apply a variety of optimizations to your design. These include, but are not limited to, mergingprocesses, pulling constants out of loops, clock suppression, and signal collapsing. You control the level of optimization by specifying certain Switches when you invoke the compiler.
標簽： optimizations simulation ModelSim increase
上傳時間： 2013-12-25
上傳用戶：pkkkkp
This directory contains example ADSPBF535 code, written in assembly, that changes the frequency and voltage using the push button Switches on the board.
標簽： directory frequency contains assembly
上傳時間： 2014-01-03
上傳用戶：evil
The first task at hand is to set up the endpoints appropriately for this example. The following code Switches the CPU clock speed to 48 MHz (since at power-on default it is 12 MHz), and sets up EP2 as a Bulk OUT endpoint, 4x buffered of size 512, and EP6 as a Bulk IN endpoint, also 4x buffered of size 512. This set-up utilizes the maximum allotted 4-KB FIFO space. It also sets up the FIFOs for manual mode, word-wide operation, and goes through a FIFO reset and arming sequence to ensure that they are ready for data operations
標簽： appropriately The endpoints following
上傳時間： 2013-12-02
上傳用戶：dianxin61
Flex chip implementation File: UP2FLEX JTAG jumper settings: down, down, up, up Input: Reset - FLEX_PB1 Input n - FLEX_SW Switches 1 to 8 Output: Countdown - two 7-segment LEDs. Done light - decimal point on Digit1. Operation: Setup the binary input n number. Press the Reset switch. See the countdown from n down to 0 on the 7-segment LEDs. Done light lit when program terminates.
標簽： down implementation settings UP2FLEX
上傳時間： 2014-01-21
上傳用戶：sclyutian
這個Matlab程序包，涵蓋了很多著名的電力電子，包含的電力設備有：rectifier,ac controllers,convertors,Switches等等。涉及整流器,交流控制器,變換器。
上傳時間： 2014-01-22
上傳用戶：lindor
