The PCI Local bus concept was developed to break the PC data I/O bottleneck and clearly opens the door to increasing system speed and expansion capabilities. The PCI Local bus moves high speed peripherals from the I/O bus and places them closer to the system’s processor bus, providing faster data transfers between the processor and peripherals. The PCI Local bus also addresses the industry’s need for a bus standard which is not directly dependent on the speed, size and type of system processor. It represents the first microprocessor independent bus offering performance more than adequate for the most demanding applications such as full-motion video. Hardware reference
標簽: bottleneck developed the concept
上傳時間: 2016-03-18
上傳用戶:極客
The PCI Local bus concept was developed to break the PC data I/O bottleneck and clearly opens the door to increasing system speed and expansion capabilities. The PCI Local bus moves high speed peripherals from the I/O bus and places them closer to the system’s processor bus, providing faster data transfers between the processor and peripherals. The PCI Local bus also addresses the industry’s need for a bus standard which is not directly dependent on the speed, size and type of system processor. It represents the first microprocessor independent bus offering performance more than adequate for the most demanding applications such as full-motion video. User Manual
標簽: bottleneck developed the concept
上傳時間: 2014-01-15
上傳用戶:努力努力再努力
This code takes data received from a bearing and converts it from the time domain to the frequency domain in order to determine bearing defect size.
標簽: from frequency the converts
上傳時間: 2017-03-11
上傳用戶:sunjet
Compression using lempel-ziv -for a dictionary size of 2k -provide dictionary Lempel ziv algorithm is a dictionary based algorithm that addresses byte sequences from former contents instead of the original data. This algorithm consists of a rule for parsing strings of symbols from a finite alphabet into substrings, whose lengths do not exceed a prescribed integer and a coding scheme which maps these substrings sequentially into uniquely decipherable code words of fixed length. The strings are selected so that they have nearly equal probability of occurrence. Frequently-occurring symbols are grouped into longer strings while occasional symbols appear in short strings.
標簽: dictionary Compression lempel-ziv provide
上傳時間: 2014-01-07
上傳用戶:我們的船長
游戲開發數據結構-Data.Structures.for.Game.Programmers
標簽: Programmers Structures Data Game
上傳時間: 2013-06-10
上傳用戶:eeworm
Can convert data file(txt format)to CAD(scr)file,and draw curve!
上傳時間: 2013-09-11
上傳用戶:天空說我在
針對科研實驗中對拉壓千斤頂加載過程控制的需要,采用ATmega128單片機控制步進電機進而實現對執行系統的電動泵站實行自動控制。對力和位移的數據采集與處理及用步進電機控制電動泵站手柄的技術細節作了重點描述。通過單片機的A/D變換器對AMP放大模塊采集的電橋信號作量化處理,千斤頂的操控手柄位置依電動油泵閥門開啟的方向和大小作若干定位,單片機根據力或位移傳感器信號,實時控制步進電機驅動手柄旋轉到相應操控位置。 Abstract: This article describes the use of ATmega128 AVR microcontroller series of DBS electric pumping stations and QF100/200 separate twoway hydraulic jack to automate the process of manipulating the work of the technical content. Articles on force and displacement data acquisition and processing, and stepper motor control electric pump with the handle of the key technical details were described. Through the MCU’s A / D converter module is collected on the AMP amplification quantify the signal bridge, jack handle position control valve opening according to the direction of electric pumps for a number of positioning and size of the microcontroller based on force or displacement sensor signals, real-time control stepper motor drive control handle rotate to the appropriate location.
上傳時間: 2014-01-16
上傳用戶:hasan2015
以太網和CAN總線應用廣泛,但由于其通信協議不同,兩種總線器件間無法進行數據通信,因此,設計了基于CP2200與C8051F040的以太網總線與CAN總線接口轉換電路,并給出部分相關硬件電路與軟件設計分析。在保證數據完整和協議可靠的前提下,通過握手協議和簡化的以太網協議,不僅實現了以太網數據與CAN數據的轉發,同時還順利的解決了以太網的高速性與CAN的低速率沖突,以及兩者數據包之間的大小不同的矛盾。 Abstract: In the development of actual application, Ethernet and CAN bus are used very extensively. Owing to its various communication protocols, the communicating between two kinds of bus device can’t be carried out. Therefore, in order to solve this problem, the Ethernet-CAN bus interface circuit based on CP2200 and C8051F040 was designed in this paper, and part of the related hardware circuit and software design analysis were given. On the condition of data’s integrity and protocols’reliability, through the handshaking protocols and the simplified the Ethernet protocol, not only the data switching between CAN and Ethernet was realized, but also the differ in velocity and packet size was solved.
上傳時間: 2013-10-15
上傳用戶:Ants
基于幅移鍵控技術ASK(Amplitude-Shift Keying),以C8051F340單片機作為監測終端控制器,C8051F330D單片機作為探測節點控制器,采用半雙工的通信方式,通過監控終端和探測節點的無線收發電路,實現數據的雙向無線傳輸。收發電路采用直徑為0.8 mm的漆包線自行繞制成圓形空心線圈天線,天線直徑為(3.4±0.3)cm。試驗表明,探測節點與監測終端的通信距離為24 cm,通過橋接方式,節點收發功率為102 mW時,節點間的通信距離可達20 cm。與傳統無線收發模塊相比,該無線收發電路在受體積、功耗、成本限制的場合有廣闊的應用前景。 Abstract: Based on ASK technology and with the C8051F340 and C8051F330D MCU as the controller, using half-duplex communication mode, this paper achieves bi-directional data transfer. Transceiver circuit constituted by enameled wire which diameter is 0.8mm and wound into a diameter (3.4±0.3) cm circular hollow coil antenna. Tests show that the communication distance between detection and monitoring of the terminal is 24cm,the distance is up to 20cm between two nodes when using the manner of bridging and the node transceiver power is 102mW. Compared with the conventional wireless transceiver modules, the circuit has wide application prospect in small size, low cost and low power consumption and other characteristics.
上傳時間: 2013-10-19
上傳用戶:xz85592677
This application note shows how to achieve low-cost, efficient serial configuration for Spartan FPGA designs. The approachrecommended here takes advantage of unused resources in a design, thereby reducing the cost, part count, memory size,and board space associated with the serial configuration circuitry. As a result, neither processor nor PROM needs to be fullydedicated to performing Spartan configuration.In particular, information is provided on how the idle processing time of an on-board controller can be used to loadconfiguration data from an off-board source. As a result, it is possible to upgrade a Spartan design in the field by sending thebitstream over a network.
上傳時間: 2014-08-16
上傳用戶:adada