The LTC®3207/LTC3207-1 is a 600mA LED/Camera driverwhich illuminates 12 Universal LEDS (ULEDS) and onecamera fl ash LED. The ULEDS are considered universalbecause they may be individually turned on or off, setin general purpose output (GPO) mode, set to blink at aselected on-time and period, or gradate on and off at aselected gradation rate. This device also has an externalenable (ENU) pin that may be used to blink, gradate, orturn on/off the LEDS without using the I2C bus. This may beuseful if the microprocessor is in sleep or standby mode. Ifused properly, these features may save valuable memoryspace, programming time, and reduce the I2C traffi c.
上傳時間： 2014-01-04
上傳用戶：LANCE
Abstract: Designers who must interface 1-Wire temperature sensors with Xilinx field-programmable gate arrays(FPGAs) can use this reference design to drive a DS28EA00 1-Wire slave device. The downloadable softwarementioned in this document can also be used as a starting point to connect other 1-Wire slave devices. The systemimplements a 1-Wire master connected to a UART and outputs temperature to a PC from the DS28EA00 temperaturesensor. In addition, high/low alarm outputs are displayed from the DS28EA00 PIO pins using LEDS.
標簽： PicoBlaze Create Master Xilinx
上傳時間： 2013-11-12
上傳用戶：大三三
微電腦型RS-485顯示電表（24*48mm/48*96mm） 特點： 5位數RS-485顯示電表 顯示范圍-19999-99999位數 通訊協議Modbus RTU模式 寬范圍交直流兩用電源設計 尺寸小,穩定性高 主要規格： 顯示范圍:-19999~99999 digit RS-485傳輸速度: 19200/9600/4800/2400 selective RS-485通訊位址: "01"-"FF" RS-485通訊協議: Modbus RTU mode 顯示幕: Red high efficiency LEDS high 10.16 mm (0.4") (MMX-RS-11X) Red high efficiency LEDS high 20.32 mm (0.8") (MMX-RS-12X) Red high efficiency LEDS high 10.16 mm (0.4")x2 (MMX-RS-22X) 參數設定方式: Touch switches 記憶方式: Non-volatile E²PROM memory 絕緣耐壓能力: 2KVac/1 min. (input/power) 使用環境條件: 0-50℃(20 to 90% RH non-condensed) 存放環境條件: 0-70℃(20 to 90% RH non-condensed) CE認證: EN 55022:1998/A1:2000 Class A EN 61000-3-2:2000 EN 61000-3-3:1995/A1:2001 EN 55024:1998/A1:2001
上傳時間： 2015-01-03
上傳用戶：feitian920
微電腦型單相交流集合式電表（單相二線系統） 特點： 精確度0.25%滿刻度±1位數 可同時量測與顯示交流電壓,電流,頻率,瓦特,(功率因數/視在功率) 交流電壓,電流,瓦特皆為真正有效值(TRMS) 交流電流,瓦特之小數點可任意設定 瓦特單位W或KW可任意設定 CT比可任意設定(1至999) 輸入與輸出絕緣耐壓 2仟伏特/1分鐘( 突波測試強度4仟伏特(1.2x50us) 數位RS-485界面 (Optional) 主要規格： 精確度: 0.1% F.S.±1 digit (Frequency) 0.25% F.S.±1 digit(ACA,ACV,Watt,VA) 0.25% F.S. ±0.25o(Power Factor) (-.300~+.300) 輸入負載: <0.2VA (Voltage) <0.2VA (Current) 最大過載能力: Current related input: 3 x rated continuous 10 x rated 30 sec. 25 x rated 3sec. 50 x rated 1sec. Voltage related input: maximum 2 x rated continuous 過載顯示: "doFL" 顯示值范圍: 0~600.0V(Voltage) 0~999.9Hz(Frequency)(<20% for voltage input) 0~19999 digit adjustable(Current,Watt,VA) 取樣時間: 2 cycles/sec. RS-485通訊位址: "01"-"FF" RS-485傳輸速度: 19200/9600/4800/2400 selective RS-485通信協議: Modbus RTU mode 溫度系數: 100ppm/℃ (0-50℃) 顯示幕: Red high efficiency LEDS high 10.16 mm(0.4") 參數設定方式: Touch switches 記憶型式: Non-volatile E²PROM memory 絕緣抗阻: >100Mohm with 500V DC 絕緣耐壓能力: 2KVac/1 min. (input/output/power) 1600 Vdc (input/output) 突波測試: ANSI c37.90a/1974,DIN-IEC 255-4 impulse voltage 4KV(1.2x50us) 使用環境條件: 0-50℃(20 to 90% RH non-condensed) 存放環境條件: 0-70℃(20 to 90% RH non-condensed) CE認證: EN 55022:1998/A1:2000 Class A EN 61000-3-2:2000 EN 61000-3-3:1995/A1:2001 EN 55024:1998/A1:2001
上傳時間： 2015-01-03
上傳用戶：幾何公差
集合式直流電能表（小功率的） 特點： 精確度0.05%滿刻度±1位數 可同時量測與顯示/直流電壓/電流/瓦特（千瓦）/瓦特小時（千瓦小時） 電壓輸入（DC0-99.99V/0-600.0V）自動變檔功能 顯示范圍0-9999(電流/瓦特/千瓦),0至99999999(八位數瓦特小時)可任意規劃 數位RS-485 界面 (Optional) 主要規格： 輔助電源消耗功率：＜0.35VA(DC12V/DC24V) ＜0.5VA（DC48V） ＜1.5VA（AC90-240V(50/60Hz)） 精確度: 0.05% F.S. ±1 digit (23 ±5℃) 輸入范圍：Auto range(DC0-99.99V/0-600.0V(DC voltage)) 輸入抗阻：＞5MΩ（DC voltage） 取樣時間：10 cycles/second(total) 過載顯示: " doFL " 顯示值范圍: 0-9999 digit（DCA/W(KW)） 0-9999999.999 digit(WH/(KWH)) RS-485傳輸速度: 19200/9600/4800/2400 selective RS-485通訊位址: "01"-"FF"（0-255） RS-485通信協議: Modbus RTU mode 溫度系數: 50ppm/℃ (0-50℃) 顯示幕:Bight Red LEDS high 10.16 mm(0.4") 參數設定方式: Touch switches 記憶方式: Non-volatile E²PROM memory 絕緣耐壓能力:2KVac/1min.(input/output)（RS-485(Isolating)） 1600 Vdc (input/output) （RS-485(Isolating)） 使用環境條件: 0-50℃(20 to 90% RH non-condensed) 存放環境條件: 0-70℃(20 to 90% RH non-condensed) CE認證: EN 55022:1998/A1:2000 Class A EN 61000-3-2:2000 EN 61000-3-3:1995/A1:2001 EN 55024:1998/A1:2001
上傳時間： 2013-11-20
上傳用戶：s363994250
The aim of this application note is to show to scan the 4x4 matrix keypad multiplexed with a four 7-segment display. The software attached to this application note scans the pressed key and displays it on the multiplexed 7- segment LEDS. This application note makes obvious Interrupt capability of the STR710 device to offer a better key scan .
標簽： application multiplexed matrix keypad
上傳時間： 2015-09-13
上傳用戶：thuyenvinh
his design is the initial design when the board is powered-up. It increments a counter and displays the value on the 7-segment displays and LEDS. An image is also displayed on the VGA port.
標簽： design increments powered-up the
上傳時間： 2014-01-17
上傳用戶：003030
Spartan 3 Digilent Demo:This demo drives the perphrials on the Spartan 3 board. This drives a simple pattern to the VGA port, connects the switches to the LEDS, buttons to each anode of the seven segment decoder. The seven segment decoder has a simple counter running on it, and when SW0 is in the up position the seven segment decoder will display scan codes from the PS2 port. This demo how ever does not drive the RS-232 port or the memory. This is a simple design done entirely VHDL not microblaze.
標簽： Spartan drives This perphrials
上傳時間： 2014-05-29
上傳用戶：SimonQQ
VDSP++打開。This directory contains an example ADSP-BF537 RTC project that does a basic blink routine and then puts the part in deep sleep mode to be woken up from a RTC Stopwatch Event. Once woken up, the RTC is reconfigured to toggle the EZ KIT LEDS using RTC second, minute, hour, and day interrupts.
標簽： directory contains ADSP-BF example
上傳時間： 2015-12-29
上傳用戶：330402686
Linux 2.4.18 s3c2440 led driver 使用dev-C++撰寫，需要linux 2.4.18 kernel include，編譯完成後產生led module。 insmod main.o //安裝模組 mknod /dev/LEDS c 221 0 使用方法： int main(int argc, char *argv[]) { int testdev //led test... testdev = open("/dev/QuickMarkLed",O_RDWR) ioctl(testdev, 2, 1) //ioctl(device, led number, open/close) open=1 ioctl(testdev, argv[1][0]- 0 , argv[2][0]- 0 ) //ioctl(device, led number, open/close) open=1 close(testdev) return 0 }
標簽： s3c2440 driver Linux dev-C
上傳時間： 2014-01-01
上傳用戶：qlpqlq
蟲蟲下載站版權所有 京ICP備2021023401號-1
