對于電子產品設計師尤其是線路板設計人員來說，產品的可制造性設計（Design For Manufacture，簡稱DFM）是一個必須要考慮的因素，如果線路板設計不符合可制造性設計要求，將大大降低產品的生產效率，嚴重的情況下甚至?xí)?dǎo)致所設計的產品根本無法制造出來。目前通孔插裝技術（Through Hole Technology，簡稱THT）仍然在使用，DFM在提高通孔插裝制造的效率和可靠性方面可以起到很大作用，DFM方法能有助于通孔插裝制造商降低缺陷并保持競爭力。本文介紹一些和通孔插裝有關的DFM方法，這些原則從本質上來講具有普遍性，但不一定在任何情況下都適用，不過，對于與通孔插裝技術打交道的PCB設計人員和工程師來說相信還是有一定的幫助。1、排版與布局在設計階段排版得當可避免很多制造過程中的麻煩。（1）用大的板子可以節約材料，但由于翹曲和重量原因，在生產中運輸會比較困難，它需要用特殊的夾具進行固定，因此應盡量避免使用大于23cm×30cm的板面。最好是將所有板子的尺寸控制在兩三種之內，這樣有助于在產品更換時縮短調整導軌、重新擺放條形碼閱讀器位置等所導致的停機時間，而且板面尺寸種類少還可以減少波峰焊溫度曲線的數量。（2）在一個板子里包含不同種拼板是一個不錯的設計方法，但只有那些最終做到一個產品里并具有相同生產工藝要求的板才能這樣設計。（3）在板子的周圍應提供一些邊框，尤其在板邊緣有元件時，大多數自動裝配設備要求板邊至少要預留5mm的區域。（4）盡量在板子的頂面(元件面)進行布線，線路板底面(焊接面)容易受到損壞。不要在靠近板子邊緣的地方布線，因?yàn)樯a(chǎn)過程中都是通過板邊進行抓持，邊上的線路會被波峰焊設備的卡爪或邊框傳送器損壞。（5）對于具有較多引腳數的器件（如接線座或扁平電纜），應使用橢圓形焊盤而不是圓形，以防止波峰焊時出現錫橋(圖1)。
上傳時間： 2013-11-07
上傳用戶：refent
現代的電子設計和芯片制造技術正在飛速發展，電子產品的復雜度、時鐘和總線頻率等等都呈快速上升趨勢，但系統的電壓卻不斷在減小，所有的這一切加上產品投放市場的時間要求給設計師帶來了前所未有的巨大壓力。要想保證產品的一次性成功就必須能預見設計中可能出現的各種問題，并及時給出合理的解決方案，對于高速的數字電路來說，最令人頭大的莫過于如何確保瞬時跳變的數字信號通過較長的一段傳輸線，還能完整地被接收，并保證良好的電磁兼容性，這就是目前頗受關注的信號完整性（SI）問題。本章就是圍繞信號完整性的問題，讓大家對高速電路有個基本的認識，并介紹一些相關的基本概念。 第一章 高速數字電路概述.....................................................................................51.1 何為高速電路...............................................................................................51.2 高速帶來的問題及設計流程剖析...............................................................61.3 相關的一些基本概念...................................................................................8第二章 傳輸線理論...............................................................................................122.1 分布式系統和集總電路.............................................................................122.2 傳輸線的RLCG 模型和電報方程...............................................................132.3 傳輸線的特征阻抗.....................................................................................142.3.1 特性阻抗的本質.................................................................................142.3.2 特征阻抗相關計算.............................................................................152.3.3 特性阻抗對信號完整性的影響.........................................................172.4 傳輸線電報方程及推導.............................................................................182.5 趨膚效應和集束效應.................................................................................232.6 信號的反射.................................................................................................252.6.1 反射機理和電報方程.........................................................................252.6.2 反射導致信號的失真問題.................................................................302.6.2.1 過沖和下沖.....................................................................................302.6.2.2 振蕩：.............................................................................................312.6.3 反射的抑制和匹配.............................................................................342.6.3.1 串行匹配.........................................................................................352.6.3.1 并行匹配.........................................................................................362.6.3.3 差分線的匹配.................................................................................392.6.3.4 多負載的匹配.................................................................................41第三章 串?dāng)_的分析...............................................................................................423.1 串?dāng)_的基本概念.........................................................................................423.2 前向串?dāng)_和后向串?dāng)_.................................................................................433.3 后向串?dāng)_的反射.........................................................................................463.4 后向串?dāng)_的飽和.........................................................................................463.5 共模和差模電流對串?dāng)_的影響.................................................................483.6 連接器的串?dāng)_問題.....................................................................................513.7 串?dāng)_的具體計算.........................................................................................543.8 避免串?dāng)_的措施.........................................................................................57第四章 EMI 抑制....................................................................................................604.1 EMI/EMC 的基本概念..................................................................................604.2 EMI 的產生..................................................................................................614.2.1 電壓瞬變.............................................................................................614.2.2 信號的回流.........................................................................................624.2.3 共模和差摸EMI ..................................................................................634.3 EMI 的控制..................................................................................................654.3.1 屏蔽.....................................................................................................654.3.1.1 電場屏蔽.........................................................................................654.3.1.2 磁場屏蔽.........................................................................................674.3.1.3 電磁場屏蔽.....................................................................................674.3.1.4 電磁屏蔽體和屏蔽效率.................................................................684.3.2 濾波.....................................................................................................714.3.2.1 去耦電容.........................................................................................714.3.2.3 磁性元件.........................................................................................734.3.3 接地.....................................................................................................744.4 PCB 設計中的EMI.......................................................................................754.4.1 傳輸線RLC 參數和EMI ........................................................................764.4.2 疊層設計抑制EMI ..............................................................................774.4.3 電容和接地過孔對回流的作用.........................................................784.4.4 布局和走線規則.................................................................................79第五章 電源完整性理論基礎...............................................................................825.1 電源噪聲的起因及危害.............................................................................825.2 電源阻抗設計.............................................................................................855.3 同步開關噪聲分析.....................................................................................875.3.1 芯片內部開關噪聲.............................................................................885.3.2 芯片外部開關噪聲.............................................................................895.3.3 等效電感衡量SSN ..............................................................................905.4 旁路電容的特性和應用.............................................................................925.4.1 電容的頻率特性.................................................................................935.4.3 電容的介質和封裝影響.....................................................................955.4.3 電容并聯特性及反諧振.....................................................................955.4.4 如何選擇電容.....................................................................................975.4.5 電容的擺放及Layout ........................................................................99第六章 系統時序.................................................................................................1006.1 普通時序系統...........................................................................................1006.1.1 時序參數的確定...............................................................................1016.1.2 時序約束條件...................................................................................1066.2 源同步時序系統.......................................................................................1086.2.1 源同步系統的基本結構...................................................................1096.2.2 源同步時序要求...............................................................................110第七章 IBIS 模型................................................................................................1137.1 IBIS 模型的由來...................................................................................... 1137.2 IBIS 與SPICE 的比較.............................................................................. 1137.3 IBIS 模型的構成...................................................................................... 1157.4 建立IBIS 模型......................................................................................... 1187.4 使用IBIS 模型......................................................................................... 1197.5 IBIS 相關工具及鏈接..............................................................................120第八章 高速設計理論在實際中的運用.............................................................1228.1 疊層設計方案...........................................................................................1228.2 過孔對信號傳輸?shù)挠绊?..........................................................................1278.3 一般布局規則...........................................................................................1298.4 接地技術...................................................................................................1308.5 PCB 走線策略............................................................................................134
標簽： 信號完整性
上傳時間： 2014-05-15
上傳用戶：dudu1210004
PCB LAYOUT 術語解釋(TERMS)1. COMPONENT SIDE(零件面、正面)︰大多數零件放置之面。2. SOLDER SIDE(焊錫面、反面)。3. SOLDER MASK(止焊膜面)︰通常指Solder Mask Open 之意。4. TOP PAD︰在零件面上所設計之零件腳PAD，不管是否鑽孔、電鍍。5. BOTTOM PAD：在銲錫面上所設計之零件腳PAD，不管是否鑽孔、電鍍。6. POSITIVE LAYER：?jiǎn)巍㈦p層板之各層線路；多層板之上、下兩層線路及內層走線皆屬之。7. NEGATIVE LAYER：通常指多層板之電源層。8. INNER PAD：多層板之POSITIVE LAYER 內層PAD。9. ANTI-PAD：多層板之NEGATIVE LAYER 上所使用之絕緣範圍，不與零件腳相接。10. THERMAL PAD：多層板內NEGATIVE LAYER 上必須零件腳時所使用之PAD，一般稱為散熱孔或?qū)住?1. PAD (銲墊)：除了SMD PAD 外，其他PAD 之TOP PAD、BOTTOM PAD 及INNER PAD 之形狀大小皆應相同。12. Moat : 不同信號的 Power& GND plane 之間的分隔線13. Grid : 佈線時的走線格點2. Test Point : ATE 測試點供工廠ICT 測試治具使用ICT 測試點 LAYOUT 注意事項:PCB 的每條TRACE 都要有一個作為測試用之TEST PAD(測試點)，其原則如下：1. 一般測試點大小均為30-35mil，元件分布較密時，測試點最小可至30mil.測試點與元件PAD 的距離最小為40mil。2. 測試點與測試點間的間距最小為50-75mil，一般使用75mil。密度高時可使用50mil,3. 測試點必須均勻分佈於PCB 上，避免測試時造成板面受力不均。4. 多層板必須透過貫穿孔(VIA)將測試點留於錫爐著錫面上(Solder Side)。5. 測試點必需放至於Bottom Layer6. 輸出test point report(.asc 檔案powerpcb v3.5)供廠商分析可測率7. 測試點設置處:Setuppadsstacks
標簽： layout design pcb 硬件工程師
上傳時間： 2013-10-22
上傳用戶：pei5
第一部分 信號完整性知識基礎.................................................................................5第一章 高速數字電路概述.....................................................................................51.1 何為高速電路...............................................................................................51.2 高速帶來的問題及設計流程剖析...............................................................61.3 相關的一些基本概念...................................................................................8第二章 傳輸線理論...............................................................................................122.1 分布式系統和集總電路.............................................................................122.2 傳輸線的RLCG 模型和電報方程...............................................................132.3 傳輸線的特征阻抗.....................................................................................142.3.1 特性阻抗的本質.................................................................................142.3.2 特征阻抗相關計算.............................................................................152.3.3 特性阻抗對信號完整性的影響.........................................................172.4 傳輸線電報方程及推導.............................................................................182.5 趨膚效應和集束效應.................................................................................232.6 信號的反射.................................................................................................252.6.1 反射機理和電報方程.........................................................................252.6.2 反射導致信號的失真問題.................................................................302.6.2.1 過沖和下沖.....................................................................................302.6.2.2 振蕩：.............................................................................................312.6.3 反射的抑制和匹配.............................................................................342.6.3.1 串行匹配.........................................................................................352.6.3.1 并行匹配.........................................................................................362.6.3.3 差分線的匹配.................................................................................392.6.3.4 多負載的匹配.................................................................................41第三章 串?dāng)_的分析...............................................................................................423.1 串?dāng)_的基本概念.........................................................................................423.2 前向串?dāng)_和后向串?dāng)_.................................................................................433.3 后向串?dāng)_的反射.........................................................................................463.4 后向串?dāng)_的飽和.........................................................................................463.5 共模和差模電流對串?dāng)_的影響.................................................................483.6 連接器的串?dāng)_問題.....................................................................................513.7 串?dāng)_的具體計算.........................................................................................543.8 避免串?dāng)_的措施.........................................................................................57第四章 EMI 抑制....................................................................................................604.1 EMI/EMC 的基本概念..................................................................................604.2 EMI 的產生..................................................................................................614.2.1 電壓瞬變.............................................................................................614.2.2 信號的回流.........................................................................................624.2.3 共模和差摸EMI ..................................................................................634.3 EMI 的控制..................................................................................................654.3.1 屏蔽.....................................................................................................654.3.1.1 電場屏蔽.........................................................................................654.3.1.2 磁場屏蔽.........................................................................................674.3.1.3 電磁場屏蔽.....................................................................................674.3.1.4 電磁屏蔽體和屏蔽效率.................................................................684.3.2 濾波.....................................................................................................714.3.2.1 去耦電容.........................................................................................714.3.2.3 磁性元件.........................................................................................734.3.3 接地.....................................................................................................744.4 PCB 設計中的EMI.......................................................................................754.4.1 傳輸線RLC 參數和EMI ........................................................................764.4.2 疊層設計抑制EMI ..............................................................................774.4.3 電容和接地過孔對回流的作用.........................................................784.4.4 布局和走線規則.................................................................................79第五章 電源完整性理論基礎...............................................................................825.1 電源噪聲的起因及危害.............................................................................825.2 電源阻抗設計.............................................................................................855.3 同步開關噪聲分析.....................................................................................875.3.1 芯片內部開關噪聲.............................................................................885.3.2 芯片外部開關噪聲.............................................................................895.3.3 等效電感衡量SSN ..............................................................................905.4 旁路電容的特性和應用.............................................................................925.4.1 電容的頻率特性.................................................................................935.4.3 電容的介質和封裝影響.....................................................................955.4.3 電容并聯特性及反諧振.....................................................................955.4.4 如何選擇電容.....................................................................................975.4.5 電容的擺放及Layout ........................................................................99第六章 系統時序.................................................................................................1006.1 普通時序系統...........................................................................................1006.1.1 時序參數的確定...............................................................................1016.1.2 時序約束條件...................................................................................1063.2 高速設計的問題.......................................................................................2093.3 SPECCTRAQuest SI Expert 的組件.......................................................2103.3.1 SPECCTRAQuest Model Integrity .................................................2103.3.2 SPECCTRAQuest Floorplanner/Editor .........................................2153.3.3 Constraint Manager .......................................................................2163.3.4 SigXplorer Expert Topology Development Environment .......2233.3.5 SigNoise 仿真子系統......................................................................2253.3.6 EMControl .........................................................................................2303.3.7 SPECCTRA Expert 自動布線器.......................................................2303.4 高速設計的大致流程...............................................................................2303.4.1 拓?fù)浣Y(jié)構的探索...............................................................................2313.4.2 空間解決方案的探索.......................................................................2313.4.3 使用拓?fù)淠０弪?qū)動設計...................................................................2313.4.4 時序驅動布局...................................................................................2323.4.5 以約束條件驅動設計.......................................................................2323.4.6 設計后分析.......................................................................................233第四章 SPECCTRAQUEST SIGNAL EXPLORER 的進階運用..........................................2344.1 SPECCTRAQuest Signal Explorer 的功能包括：................................2344.2 圖形化的拓?fù)浣Y(jié)構探索...........................................................................2344.3 全面的信號完整性(Signal Integrity)分析.......................................2344.4 完全兼容 IBIS 模型...............................................................................2344.5 PCB 設計前和設計的拓?fù)浣Y(jié)構提取.......................................................2354.6 仿真設置顧問...........................................................................................2354.7 改變?cè)O(shè)計的管理.......................................................................................2354.8 關鍵技術特點...........................................................................................2364.8.1 拓?fù)浣Y(jié)構探索...................................................................................2364.8.2 SigWave 波形顯示器........................................................................2364.8.3 集成化的在線分析(Integration and In-process Analysis) .236第五章 部分特殊的運用...............................................................................2375.1 Script 指令的使用..................................................................................2375.2 差分信號的仿真.......................................................................................2435.3 眼圖模式的使用.......................................................................................249第四部分：HYPERLYNX 仿真工具使用指南............................................................251第一章 使用LINESIM 進行前仿真.......................................................................2511.1 用LineSim 進行仿真工作的基本方法...................................................2511.2 處理信號完整性原理圖的具體問題.......................................................2591.3 在LineSim 中如何對傳輸線進行設置...................................................2601.4 在LineSim 中模擬IC 元件.....................................................................2631.5 在LineSim 中進行串?dāng)_仿真...................................................................268第二章 使用BOARDSIM 進行后仿真......................................................................2732.1 用BOARDSIM 進行后仿真工作的基本方法...................................................2732.2 BoardSim 的進一步介紹..........................................................................2922.3 BoardSim 中的串?dāng)_仿真..........................................................................309
標簽： PCB 內存 仿真技術
上傳時間： 2014-04-18
上傳用戶：wpt
介紹了一種帶后備電池的多路隔離輸出開關電源，可用于大功率器件驅動電路的供電。在市電掉電的情況下，后備電池立即接入系統，保證多路輸出開關電源的正常工作，提高整個驅動供電電源的可靠性。
標簽： 后備電池 多路 隔離 輸出開關
上傳時間： 2013-11-24
上傳用戶：781354052
這里僅討論電容及電感值的選取。種類的選取,則需要更多的工程實踐,更多的RF電路的經驗,這里不再討論。從理論上講,隔直電容、旁路電容的容量應滿足。顯然,在任何角頻率下,這在工程上是作不到的。電容量究竟取多大是合理的呢？圖1-5(a),(b)給出了隔直電容(多數情況下,這個電容又稱為耦合電容)和旁路電容的使用簡化
上傳時間： 2013-11-12
上傳用戶：13188549192
多路輸出開關電源交叉調整率
標簽： 多路輸出 交叉調整率 開關電源
上傳時間： 2013-10-31
上傳用戶：15070202241
大型 TFT-LCD 的功率需求量之大似乎永遠得不到滿足。電源必須滿足晶體管數目不斷增加和顯示器分辨率日益攀升的要求，並且還不能占用太大的板級空間。
標簽： TFT-LCD 輸出穩壓器 大型 顯示器
上傳時間： 2014-12-24
上傳用戶：watch100
高可用性繫統常常采用雙路饋送功率分配，旨在實現冗餘並增強系統的可靠性。“或”二極管把兩路電源一起連接在負載點上，最常用的是肖特基二極管，目的在於實現低損耗
標簽： 理想二極管 保護 電源布線 錯誤
上傳時間： 2013-10-19
上傳用戶：BOBOniu
時至今日，以太網供電 (PoE) 技術仍在當今的網絡世界中不斷地普及。由供電設備 (PSE) 提供並傳輸至受電設備 (PD) 輸入端的 12.95W 功率是一種通用電源
上傳時間： 2013-11-06
上傳用戶：xmsmh
蟲蟲下載站版權所有 京ICP備2021023401號-1
