在DCM狀態下選擇：Uin－電源輸入直流電壓Uinmin－電源輸入直流電壓最小值D－占空比Np－初級繞組匝數Lp－初級繞組電感量Ae－磁芯有效面積Ip－初級峰值電流f－開關頻率Ton－開關管導通時間I－初級繞組電流有效值η－開關電源效率J－電流密度
上傳時間： 2013-12-16
上傳用戶：我們的船長
K10的GPIO庫函數之實現LED燈亮滅 T17D0 000:565 SEGGER J-Link V4.40c Log File (0001ms, 0563ms total)
上傳時間： 2013-10-08
上傳用戶：ls530720646
TLC2543是TI公司的12位串行模數轉換器，使用開關電容逐次逼近技術完成A/D轉換過程。由于是串行輸入結構，能夠節省51系列單片機I/O資源；且價格適中，分辨率較高，因此在儀器儀表中有較為廣泛的應用。 TLC2543的特點 （1）12位分辯率A/D轉換器； （2）在工作溫度范圍內10μs轉換時間； （3）11個模擬輸入通道； （4）3路內置自測試方式； （5）采樣率為66kbps； （6）線性誤差±1LSBmax； （7）有轉換結束輸出EOC； （8）具有單、雙極性輸出； （9）可編程的MSB或LSB前導； （10）可編程輸出數據長度。 TLC2543的引腳排列及說明 TLC2543有兩種封裝形式：DB、DW或N封裝以及FN封裝，這兩種封裝的引腳排列如圖1，引腳說明見表1 TLC2543電路圖和程序欣賞 #include<reg52.h> #include<intrins.h> #define uchar unsigned char #define uint unsigned int sbit clock=P1^0; sbit d_in=P1^1; sbit d_out=P1^2; sbit _cs=P1^3; uchar a1,b1,c1,d1; float sum,sum1; double sum_final1; double sum_final; uchar duan[]={0x3f,0x06,0x5b,0x4f,0x66,0x6d,0x7d,0x07,0x7f,0x6f}; uchar wei[]={0xf7,0xfb,0xfd,0xfe}; void delay(unsigned char b) //50us { unsigned char a; for(;b>0;b--) for(a=22;a>0;a--); } void display(uchar a,uchar b,uchar c,uchar d) { P0=duan[a]|0x80; P2=wei[0]; delay(5); P2=0xff; P0=duan[b]; P2=wei[1]; delay(5); P2=0xff; P0=duan[c]; P2=wei[2]; delay(5); P2=0xff; P0=duan[d]; P2=wei[3]; delay(5); P2=0xff; } uint read(uchar port) { uchar i,al=0,ah=0; unsigned long ad; clock=0; _cs=0; port<<=4; for(i=0;i<4;i++) { d_in=port&0x80; clock=1; clock=0; port<<=1; } d_in=0; for(i=0;i<8;i++) { clock=1; clock=0; } _cs=1; delay(5); _cs=0; for(i=0;i<4;i++) { clock=1; ah<<=1; if(d_out)ah|=0x01; clock=0; } for(i=0;i<8;i++) { clock=1; al<<=1; if(d_out) al|=0x01; clock=0; } _cs=1; ad=(uint)ah; ad<<=8; ad|=al; return(ad); } void main() { uchar j; sum=0;sum1=0; sum_final=0; sum_final1=0; while(1) { for(j=0;j<128;j++) { sum1+=read(1); display(a1,b1,c1,d1); } sum=sum1/128; sum1=0; sum_final1=(sum/4095)*5; sum_final=sum_final1*1000; a1=(int)sum_final/1000; b1=(int)sum_final%1000/100; c1=(int)sum_final%1000%100/10; d1=(int)sum_final%10; display(a1,b1,c1,d1); } }
上傳時間： 2013-11-19
上傳用戶：shen1230
為了檢測血壓測量系統中的微弱信號，采用由分立元件構成儀表放大器作為壓力傳感器前置放大器。運用Multsim對儀表放大器進行設計仿真，并對硬件電路安裝調試。當輸入信號帶寬控制在10 Hz~2 kHz內，調節電位器RP可以使儀表放大器的增益可達90 dB。測試表明儀表放大器指標符合血壓測量系統要求。
上傳時間： 2013-11-22
上傳用戶：zhyiroy
對應程序： #include<reg52.h> #define uint unsigned int #define uchar unsigned char uchar code tab[]={ 0x81, 0x42, 0x24, 0x18, }; void delay(uint z) { uint i,j; for(i=z;i>0;i--) for(j=120;j>0;j--); } void init() { P0=0x00; }
上傳時間： 2014-01-17
上傳用戶：ruan2570406
第一章 序論……………………………………………………………6 1- 1 研究動機…………………………………………………………..7 1- 2 專題目標…………………………………………………………..8 1- 3 工作流程…………………………………………………………..9 1- 4 開發環境與設備…………………………………………………10 第二章 德州儀器OMAP 開發套件…………………………………10 2- 1 OMAP介紹………………………………………………………10 2-1.1 OMAP是什麼?…….………………………………….…10 2-1.2 DSP的優點……………………………………………....11 2- 2 OMAP Architecture介紹………………………………………...12 2-2-1 OMAP1510 硬體架構………………………………….…12 2-2.2 OMAP1510軟體架構……………………………………...12 2-2.3 DSP / BIOS Bridge簡述…………………………………...13 2- 3 TI Innovator套件 -- OMAP1510 ……………………………..14 2-2.1 General Purpose processor -- ARM925T………………...14 2-2.2 DSP processor -- TMS320C55x …………………………15 2-2.3 IDE Tool – CCS …………………………………………15 2-2.4 Peripheral ………………………………………………..16 第三章 在OMAP1510上建構Embedded Linux System…………….17 3- 1 嵌入式工具………………………………………………………17 3-1.1 嵌入式程式開發與一般程式開發之不同………….….17 3-1.2 Cross Compiling的GNU工具程式……………………18 3-1.3 建立ARM-Linux Cross-Compiling 工具程式………...19 3-1.4 Serial Communication Program………………………...20 3- 2 Porting kernel………………………………………………….…21 3-2.1 Setup CCS ………………………………………….…..21 3-2.2 編譯及上傳Loader…………………………………..…23 3-2.3 編譯及上傳Kernel…………………………………..…24 3- 3 建構Root File System………………………………………..…..26 3-3.1 Flash ROM……………………………………………...26 3-3.2 NFS mounting…………………………………………..27 3-3.3 支援NFS Mounting 的kernel…………………………..27 3-3.4 提供NFS Mounting Service……………………………29 3-3.5 DHCP Server……………………………………………31 3-3.6 Linux root 檔案系統……………………………….…..32 3- 4 啟動及測試Innovator音效裝置…………………………..…….33 3- 5 建構支援DSP processor的環境…………………………...……34 3-5.1 Solution -- DSP Gateway簡介……………………..…34 3-5.2 DSP Gateway運作架構…………………………..…..35 3- 6 架設DSP Gateway………………………………………….…36 3-6.1 重編kernel……………………………………………...36 3-6.2 DEVFS driver…………………………………….……..36 3-6.3 編譯DSP tool和API……………………………..…….37 3-6.4 測試……………………………………………….…….37 第四章 MP3 Player……………………………………………….…..38 4- 1 MP3 介紹………………………………………………….…….38 4- 2 MP3 壓縮原理……………………………………………….….39 4- 3 Linux MP3 player – splay………………………………….…….41 4.3-1 splay介紹…………………………………………….…..41 4.3-2 splay 編譯………………………………………….…….41 4.3-3 splay 的使用說明………………………………….……41 第五章 程式改寫………………………………………………...…...42 5-1 程式評估與改寫………………………………………………...…42 5-1.1 Inter-Processor Communication Scheme…………….....42 5-1.2 ARM part programming……………………………..…42 5-1.3 DSP part programming………………………………....42 5-2 程式碼………………………………………………………..……43 5-3 雙處理器程式開發注意事項…………………………………...…47 第六章 效能評估與討論……………………………………………48 6-1 速度……………………………………………………………...48 6-2 CPU負載………………………………………………………..49 6-3 討論……………………………………………………………...49 6-3.1分工處理的經濟效益………………………………...49 6-3.2音質v.s 浮點與定點運算………………………..…..49 6-3.3 DSP Gateway架構的限制………………………….…50 6-3.4減少IO溝通……………….………………………….50 6-3.5網路掛載File System的Delay…………………..……51 第七章 結論心得…
上傳時間： 2013-10-14
上傳用戶：a471778
HT49R30A-1八位單片機特點工作電壓3.0V ~ 5.5V6 位輸入口8 位雙向輸入/輸出口2 個外部中斷輸入帶PFD 可編程分頻器功能的一個8 位可編程定時/計數器帶19 3 或19 4 段 的LCD 驅動器2K 14 位的程序存儲器EPROM96 8 位的數據存儲器RAM實時時鐘RTC實時時鐘RTC 的8 位前置分頻器
上傳時間： 2013-11-20
上傳用戶：GeekyGeek
I/O 型單片機使用手冊 目錄 間接尋址寄存器 – IAR, IAR0, IAR1 .............................................35間接尋址指針 – MP, MP0, MP1 ......................................................35存儲區指針 – BP .........................................................................36累加器 – ACC...................................................................................37程序計數器低字節寄存器 – PCL....................................................37表格寄存器 – TBLP,TBHP,TBLH....................................................37看門狗定時寄存器 – WDTS............................................................38狀態寄存器 – STATUS.....................................................................38中斷控制寄存器 – INTC,INTC0,INTC1 .........................................39定時/計數寄存器...............................................................................39輸入/輸出端口和控制寄存器...........................................................40UART 寄存器 .USR,UCR1,UCR2,TXR/RXR,BRG.......................40輸入/輸出端口..........................................................................................41上拉電阻............................................................................................41PA 口的喚醒......................................................................................41輸入/輸出端口控制寄存器...............................................................41引腳共享功能....................................................................................42編程注意事項....................................................................................45定時/計數器..............................................................................................46配置定時/計數器輸入時鐘源...........................................................47定時/計數寄存器 – TMR, TMR0,TMR0L/TMR0H,TMR1L/TMR1H,TMR2.....................................................................49定時/計數控制寄存器 – TMRC,TMR0C,TMR1C,TMR2C............50定時器模式........................................................................................53事件計數器模式................................................................................53脈沖寬度測量模式............................................................................54可編程分頻器(PFD)和蜂鳴器的應用..............................................55預分頻器(Prescaler)...........................................................................56輸入/輸出接口...................................................................................56編程注意事項....................................................................................57定時/計數器應用范例.......................................................................57中斷............................................................................................................59中斷寄存器........................................................................................59中斷優先權........................................................................................62外部中斷............................................................................................63定時/計數器中斷...............................................................................64UART 中斷........................................................................................64編程注意事項....................................................................................65復位和初始化............................................................................................66復位....................................................................................................66目錄iii異步串行口——UART............................................................................74UART 特性..........................................................................................74UART 外部引腳..................................................................................74數據發送.............................................................................................75UART 狀態控制寄存器......................................................................75波特率發生器.....................................................................................79UART 設置與控制..............................................................................81UART 發送器......................................................................................83UART 接收器......................................................................................84接收錯誤處理.....................................................................................85接收中斷圖解.....................................................................................86地址檢測模式.....................................................................................86暫停模式下的UART 功能.................................................................87UART 應用范例.................................................................................87振蕩器........................................................................................................89系統時鐘配置....................................................................................89系統晶體/陶瓷振蕩器.......................................................................89系統電阻電容振蕩器........................................................................90內部系統電阻電容振蕩器................................................................90RTC 振蕩器........................................................................................91看門狗定時振蕩器............................................................................91暫停和喚醒................................................................................................92暫停.....................................................................................................92進入暫停.............................................................................................92靜態電流.............................................................................................92喚醒....................................................................................................92看門狗定時器............................................................................................94掩膜選項....................................................................................................96應用電路....................................................................................................97第二部份 程序語言.....................................................................99第二章 指令集介紹.................................................................................101指令集......................................................................................................101指令周期..........................................................................................101數據的傳送......................................................................................101算術運算..........................................................................................102邏輯和移位運算..............................................................................102分支和控制的轉換..........................................................................102位運算..............................................................................................102查表運算..........................................................................................103其它運算..........................................................................................103指令設定一覽表......................................................................................104慣例..................................................................................................104I/O 型單片機使用手冊iv第三章 指令定義.....................................................................................107第四章 匯編語言和編譯器.....................................................................121常用符號..................................................................................................121語句語法..................................................................................................122名稱..................................................................................................122操作項..............................................................................................122操作數項..........................................................................................122注解..................................................................................................122編譯偽指令..............................................................................................123條件編譯偽指令..............................................................................123文件控制偽指令..............................................................................124程序偽指令......................................................................................126數據定義偽指令..............................................................................130宏指令..............................................................................................132匯編語言指令..........................................................................................136名稱..................................................................................................136助記符..............................................................................................136操作數、運算子和表達式..............................................................136其它..........................................................................................................139前置引用..........................................................................................139局部標號..........................................................................................139匯編語言保留字..............................................................................140編譯器選項..............................................................................................141編譯列表文件格式..................................................................................141源程序列表......................................................................................141編譯總結..........................................................................................142其它..................................................................................................142第三部份 開發工具................................................................... 145第五章 單片機開發工具.........................................................................147HT-IDE 集成開發環境............................................................................147盛群單片機仿真器(HT-ICE) ..................................................................149HT-ICE 接口卡.................................................................................149OTP 燒寫器.....................................................................................149OTP 適配卡.....................................................................................149系統配置..................................................................................................150HT-ICE 接口卡設置........................................................................151安裝..........................................................................................................153系統要求..........................................................................................153硬件安裝..........................................................................................153軟件安裝..........................................................................................154目錄v第六章 快速開始.....................................................................................159步驟一：建立一個新項目..............................................................159步驟二：將源程序文件加到項目中..............................................159步驟三：編譯項目..........................................................................159步驟四：燒寫OTP 單片機.............................................................160步驟五：傳送程序與掩膜選項單至Holtek ..................................160附錄............................................................................................... 161附錄A 特性曲線圖...................................................................................163附錄B 封裝信息.......................................................................................173
上傳時間： 2013-10-18
上傳用戶：blacklee
AT89C2051驅動步進電機的電路和源碼:AT89C2051驅動步進電機的電路和源碼 程序:stepper.c stepper.hex/* * STEPPER.C * sweeping stepper's rotor cw and cww 400 steps * Copyright (c) 1999 by W.Sirichote */＃i nclude c:\mc5151io.h /* include i/o header file */ ＃i nclude c:\mc5151reg.hregister unsigned char j,flag1,temp; register unsigned int cw_n,ccw_n;unsigned char step[8]={0x80,0xc0,0x40,0x60,0x20,0x30,0x10,0x90} #define n 400/* flag1 mask byte 0x01 run cw() 0x02 run ccw() */main(){ flag1=0; serinit(9600); disable(); /* no need timer interrupt */ cw_n = n; /* initial step number for cw */ flag1 |=0x01; /* initial enable cw() */while(1){ { tick_wait(); /* wait for 10ms elapsed */energize(); /* round-robin execution the following tasks every 10ms */ cw(); ccw(); } }}cw(){ if((flag1&0x01)!=0) { cw_n--; /* decrement cw step number */ if (cw_n !=0) j++; /* if not zero increment index j */ else {flag1&=~0x01; /* disable cw() execution */ ccw_n = n; /* reload step number to ccw counter */ flag1 |=0x02; /* enable cww() execution */ } }
上傳時間： 2013-11-21
上傳用戶：boyaboy
1. 文件比較器TKSDiff ：a) 二進制比較：支持字體設置和文件改動監測，微調智能比較算法b) 支持文件拖拽，內容替換和插入c) 支持復制選中文本和比較文件的文件名d) 支持選中內容的導出e) 顯示智能比較完成度f) 處理k-flash命令行g) 禁止大文件間的比較h) 修正部分內存越界問題i) 修正消除二進制標題時有時無問題j) 修正目錄比較界面模塊資源泄漏問題k) 修正快速比較設置起始地址 bug
上傳時間： 2013-10-13
上傳用戶：CSUSheep
