高的工作電壓高達100V N雙N溝道MOSFET同步驅(qū)動 The D810DCDC is a synchronous step-down switching regulator controller that can directly step-down voltages from up to 100V, making it ideal for telecom and automotive applications. The D810DCDC uses a constant on-time valley current control architecture to deliver very low duty cycles with accurate cycle-by-cycle current limit, without requiring a sense resistor. A precise internal reference provides 0.5% DC accuracy. A high bandwidth (25MHz) error amplifi er provides very fast line and load transient response. Large 1Ω gate drivers allow the D810DCDC to drive multiple MOSFETs for higher current applications. The operating frequency is selected by an external resistor and is compensated for variations in VIN and can also be synchronized to an external clock for switching-noise sensitive applications. Integrated bias control generates gate drive power from the input supply during start-up and when an output shortcircuit occurs, with the addition of a small external SOT23 MOSFET. When in regulation, power is derived from the output for higher effi ciency.
load initial_track s; % y:initial data,s:data with noiseT=0.1;
% yp denotes the sample value of position% yv denotes the sample value of velocity% Y=[yp(n);yv(n)];% error deviation caused by the random acceleration % known dataY=zeros(2,200);Y0=[0;1];Y(:,1)=Y0;A=[1 T 0 1]; B=[1/2*(T)^2 T]';H=[1 0];
C0=[0 0 0 1];C=[C0 zeros(2,2*199)];Q=(0.25)^2; R=(0.25)^2;
This application note provides a functional description of VHDL source code for a N x N DigitalCrosspoint Switch. The code is designed with eight inputs and eight outputs in order to targetthe 128-macrocell CoolRunner™-II CPLD device but can be easily expanded to target higherdensity devices. To obtain the VHDL source code described in this document, go to sectionVHDL Code, page 5 for instructions.
